Alternate Setup Method
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1.User Name
This space is provided to type in your user name that was assigned by your ISP.
2.Password
Type in your password and
3.Service Name (Optional)
A service name is rarely required by an ISP. If you are not sure if your ISP requires a service name, leave this blank.
5.My IP Address
Provided by your ISP. Enter the IP address here. (Only available when user selects “Use Static IP address” from IP Address Assignment above.)
6.MTU
The MTU setting should never be changed unless your ISP gives you a specific MTU setting. Making changes to the MTU setting can cause problems with your Internet connection including disconnection from the Internet, slow Internet access, and problems with Internet applications working properly.
7.Disconnect after X minutes…
4.My Internet IP
1)Get Dynamically From ISP: Getting WAN IP address from ISP automatically.
2)Use Static IP address: Need to enter ISP information below fields (My IP Address).
This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, placing a check mark next to this option and entering “5” into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute.
G Wireless Router | 36 |