3M 803 owner manual Removing the memory card, Procedure, Important Note

Page 15

Removing the memory card

IMPORTANT NOTE!

Always return to the Home screen before removing the memory card. This helps avoid corrupting data that you collected with the Handheld and saved to the memory card.

Procedure

1Press Home to return to the Home screen.

This ensures that the Handheld

finishes any write activities before you attempt to remove the memory card.

2 Grasp the memory card and pull it straight out from the Handheld.

 To make it easier to remove a memory card, attach a memory- card pull tab to the memory card.

702_010

Figure 5: Return to the 3M software Home screen before removing the memory card from the Handheld.

Image 15

Contents Copyright 2003-2010 3M. All rights reserved Track and Trace SolutionsHandheld RFID Reader Model Owner’s Manual78-8126-8363-5 Rev C 3M Handheld RFID Reader Model 803 Owner’s Manual2003-2010 3M. All rights reserved 3M is a trademark of 3MHandheld RFID Reader Safety informationBattery Management Requesting servicePage EXPLANATION OF SIGNAL WORD CONSEQUENCES Safety informationIntended use Attention Read accompanying documentation Risk of Electric ShockTo reduce the risk associated with fire and explosion Safety messagesIMPORTANT NOTES Do not over tighten the antenna adjustment screwAlways use the Change Battery function when you change the battery Important notesPWR COM/STATUS Safety label locationsN1108 ModelFCC Intentional Radiator Certification EMC, USA, and Canada complianceJapan FCC Radio Frequency Rules and RegulationsGetting started Using the 3M Handheld RFID Reader for the first timeStep 2 - Charge the battery and insert it into the Handheld 1 See Charging the battery on pagea battery SpecificationsBattery type Battery chargerAdjustment Handheld componentsFigure 1 Handheld components Antenna Indicator Lights Scroll Buttons Menu Buttons AntennaFigure 2 The Handheld includes a menu-driven display screen Controls and indicators2 - Insert the memory card 1 - Install a pull tab on the memory cardDatabase Errors Inserting the memory cardRemoving the memory card ProcedureFigure 6 Handheld reset button Resetting the HandheldTo reset the Handheld If pressing the reset button did not work…Figure 7 If the Handheld displays database Formatting a memory cardUsing the 3M Handheld RFID Reader for the first time Adjusting the antennaCleaning the Handheld Figure 8 Use the antenna adjustment tool to adjust the antennaFigure 9 Battery charging system Battery ManagementBattery charging guidelines Battery useBattery Charger Status Light Charging the batteryTo charge a battery a Connect the power supply output to the charger standFigure 12 Before removing a battery, select Change Battery Replacing the batteryRemoving the battery Installing the batteryFor software support Requesting service3M Service phone numbers For serviceOrdering replacement parts Stock NumberDescription