3M 803 owner manual Safety information, Intended use, Explanation Of Signal Word Consequences

Page 5
Safety information

Safety information

Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M™ Handheld RFID Reader Model 803. Retain these instructions for future reference.

Intended use

The 3M Handheld RFID Reader Model 803 is intended for use in processing 3M™ RFID Tags. These tags are used to identify items, such as books, videocassettes, files, etc., for various users.

This device is intended for use in an indoor library environment, and has not been evaluated for other uses or locations.

EXPLANATION OF SIGNAL WORD CONSEQUENCES

DANGER:

Indicates a potentially hazardous situation, which, if not avoided, will result in

death or serious injury and/or property damage.

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

in death or serious injury and/or property damage.

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result

in minor or moderate injury and/or property damage.

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result

in property damage.

 

 

 

EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS

Attention: Read accompanying documentation

Risk of Electric Shock

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Handheld RFID Reader Model Track and Trace SolutionsOwner’s Manual Copyright 2003-2010 3M. All rights reserved2003-2010 3M. All rights reserved 3M Handheld RFID Reader Model 803 Owner’s Manual3M is a trademark of 3M 78-8126-8363-5 Rev CBattery Management Safety informationRequesting service Handheld RFID ReaderPage Intended use Safety informationAttention Read accompanying documentation Risk of Electric Shock EXPLANATION OF SIGNAL WORD CONSEQUENCESTo reduce the risk associated with fire and explosion Safety messagesAlways use the Change Battery function when you change the battery Do not over tighten the antenna adjustment screwImportant notes IMPORTANT NOTESN1108 Safety label locationsModel PWR COM/STATUSJapan EMC, USA, and Canada complianceFCC Radio Frequency Rules and Regulations FCC Intentional Radiator CertificationStep 2 - Charge the battery and insert it into the Handheld Using the 3M Handheld RFID Reader for the first time1 See Charging the battery on page Getting startedBattery type SpecificationsBattery charger a batteryFigure 1 Handheld components Handheld componentsAntenna Indicator Lights Scroll Buttons Menu Buttons Antenna AdjustmentFigure 2 The Handheld includes a menu-driven display screen Controls and indicatorsDatabase Errors 1 - Install a pull tab on the memory cardInserting the memory card 2 - Insert the memory cardRemoving the memory card ProcedureTo reset the Handheld Resetting the HandheldIf pressing the reset button did not work… Figure 6 Handheld reset buttonFigure 7 If the Handheld displays database Formatting a memory cardCleaning the Handheld Adjusting the antennaFigure 8 Use the antenna adjustment tool to adjust the antenna Using the 3M Handheld RFID Reader for the first timeBattery charging guidelines Battery ManagementBattery use Figure 9 Battery charging systemTo charge a battery Charging the batterya Connect the power supply output to the charger stand Battery Charger Status LightRemoving the battery Replacing the batteryInstalling the battery Figure 12 Before removing a battery, select Change Battery3M Service phone numbers Requesting serviceFor service For software supportDescription Ordering replacement partsStock Number
Top Page Image Contents