Important notes
Important notes summarize best practices that can help you avoid damaging the 3M Handheld RFID Reader Model 803 (Handheld) and/or corrupting data.
IMPORTANT NOTES!
Be careful not to damage the Handheld.
DO NOT drop the Handheld.
DO NOT leave the Handheld in locations where it might fall.
DO NOT leave the Handheld in direct sunlight.
DO NOT expose the Handheld to heat.
Only use the point of the stylus to touch the various buttons and checkboxes on the screen.
Never use a pen, pencil, or other sharp object on the display screen.
Save all the original Handheld packing materials.
You will need the packing materials if you return the Handheld for repair.
Do not over tighten the antenna adjustment screw.
Over tightening the antenna adjustment screw may damage the Handheld.
Always use the Change Battery function when you change the battery.
If you do not use the Change Battery function when changing the battery, you may lose collected data and/or corrupt the memory card. Also, you may have to reset the Handheld.
Always return to the Home screen before removing the memory card.
This helps avoid corrupting data that you collected with the Handheld and saved to the memory card.
3