Atlona AT-HD88M-SR manual Display Side, Method a Push-in button for switching input channels

￿￿￿&& !￿￿￿&￿￿￿!￿

Display Side

Method A: Push-in button for switching input channels

Press the INPUT SELECT push-in button to switch the input source on the respective output port connected to the matrix receiver in sequential order. The selected input source will be displayed on the LED of INPUT CHANNEL.

Method B1: IR remote control for switching input channels

Please press F1 to F6, Enter (), and Exit () button to enter IR control mode and decide which input channel to be selected by pressing F1 to F6, Enter (), and Exit () button, and wait a few seconds for the input channel LED display to show the number of selected input source channel. Or you can use up (￿) and down (￿) button to enter IR control mode and select the input channel in ascending and descending order respectively.

Note

F1		HDMI input source #1
F2		HDMI input source #2
F3		HDMI input source #3
F4		HDMI input source #4
F5		HDMI input source #5
F6		HDMI input source #6
Enter (	)	HDMI input source #7
Exit (	)	HDMI input source #8
Up (￿)		Switch source in ascending order
Down (￿)		Switch source in descending order

￿If AT-HD88M-R receives the IR command, the LED will flash. If not, try it again.

Method B2: IR remote control for controlling the HDMI sources

Users can use the corresponding IR remote to control respective Blu-ray Disc player or any HDMI compliant devices including AT-HD88M-SR itself with IR control at any display site.

13