Atlona AT-HD88M-SR manual Rear Panel of AT-HD88M-S, Mode L System Lock and Unlock

Page 7

'￿& !￿￿￿ ￿￿￿￿'￿￿￿&￿

Mode L: System Lock and Unlock

Lock: push SELECT button until the PRESET PROFILES shows “L” and keep pressing the SELECT button for 3 seconds, then all functions of the whole system (including the receivers, IR remote, and the commands through RS-232 or USB) will be locked automatically.

Unlock: when the LED display of PRESET PROFILES shows “L”, keep pressing the SELECT button for 3 seconds until the PRESET PROFILES shows “1” to unlock all system functions.

￿

￿

￿

Rear Panel of AT-HD88M-S

￿

15

 

 

 

￿

15

15

15

 

 

 

 

 

￿

 

 

 

10

 

 

 

￿

 

￿

￿

￿

11

14

16

14

16

17

14

16

14

16

18

13

12

10.AC Power: 100-250V 50-60Hz

11.RS-232: RS-232 control port

12.USB: USB control port

13.SW Main: 4-pin DIP switch (see DIP Switch section in p.8)

14.SW 1 – SW 8: 2-pin DIP switch (see DIP Switch section in p.8)

15.INPUT 1 – INPUT 8: HDMI inputs that connect to HDMI source devices

16.IR PASS-THROUGH 1 – 8: 3.5mm IR blaster socket for individual HDMI source control

17.OUPUT PORT 1 – 8: dual RJ-45 outputs for each output channel that connect to each matrix receiver

18.IR Main: 3.5mm IR blaster socket for HDMI source control on all 8 inputs [default socket for IR blaster]

5

Image 7
Contents Page $! % Page Features AT-HD88M-SR Mode H Panel Hold and Unhold Mode Selection 1, 2, 3, 4, 5, 6, 7, 8, E, H, L, 1Mode 1-8 Preset Profiles Mode E Edid Learning ModeRear Panel of AT-HD88M-S Mode L System Lock and UnlockAT-HD88M-R SW1-SW8 for EDID/Audio SW Main for firmware update for technical support only IR Sockets IR ExtendersIR Blaster IR Receiver Supported IR Data Format Definition of IR Earphone JackIR Blaster AT-HD88M-R as receiver unit AT-HD88M-S as master unitSource Side Method B IR Remote ControlMethod a Push-in Button Method B1 IR remote control for switching input channels Method a Push-in button for switching input channelsDisplay Side Scan button Method C Software Control through RS-232 serial portMapping button Setting buttonLinkage button Open/Close buttonCommand Set One by one settingGroup setting By using TerminalMethod a Manually connect Hdmi display to Hdmi Input Method B Using Front PanelReceiver Unit Master Unit 0x01 0xEE Custom Code 01 EE 14-key IR remote default 01 EECustom Code IR3 0x12 Custom Code 0x12 Custom Code IR4 0x13 Custom Code 0x13 Command Custom CodeSafeguards Limited Warranty