Atlona AT-HD88M-SR manual Features

Page 4

￿&￿￿￿￿￿￿￿￿￿&￿

Features:

￿State-of-the-art Silicon Image (Founder of HDMI) chipset embedded for upmost compatibility and reliability

￿HDMI 1.3c compliant

￿HDCP compliant

￿Allows any source to be displayed on multiple displays at the same time

￿Allows any HDMI display to view any HDMI source at any time

￿Supports 7.1 channel digital audio

￿Supports default HDMI EDID and learns the EDID of displays

￿The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, or RS-232 control

￿Allows controlling local HDMI sources such as DVD and TiVo by IR extender through control path at remote receiver

￿Allows to control main matrix center through control line at remote receiver

￿Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device (such as PS3), and better quality solid CAT6 cable

￿Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively

￿Fast response time – 2~5 seconds for channel switch

The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with metal RJ-45 connectors is recommended.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Page $! % Page Features AT-HD88M-SR Mode Selection 1, 2, 3, 4, 5, 6, 7, 8, E, H, L, 1 Mode 1-8 Preset ProfilesMode E Edid Learning Mode Mode H Panel Hold and UnholdMode L System Lock and Unlock Rear Panel of AT-HD88M-SAT-HD88M-R SW1-SW8 for EDID/Audio SW Main for firmware update for technical support only IR Sockets IR ExtendersIR Blaster IR Receiver Supported IR Data Format Definition of IR Earphone JackIR Blaster AT-HD88M-S as master unit AT-HD88M-R as receiver unitSource Side Method B IR Remote ControlMethod a Push-in Button Method B1 IR remote control for switching input channels Method a Push-in button for switching input channelsDisplay Side Method C Software Control through RS-232 serial port Scan buttonSetting button Linkage buttonOpen/Close button Mapping buttonOne by one setting Group settingBy using Terminal Command SetMethod B Using Front Panel Method a Manually connect Hdmi display to Hdmi InputReceiver Unit Master Unit 0x01 0xEE Custom Code 01 EE 14-key IR remote default 01 EECustom Code IR3 0x12 Custom Code 0x12 Command Custom Code Custom Code IR4 0x13 Custom Code 0x13Safeguards Limited Warranty
Top Page Image Contents