&& !&!
7. Output Port:
Pull down menu and select which source to be sent to this output port.
One by one setting
On main menu screen.
First select input source. Then select the output ports which you want to send the video and audio from this source. When you select the input source, the source will change to gray. When you select the output port one by one, the selected output port will change to gray.
The linking line will change to yellow.
Group setting
First select output ports one by one. Then select the input source. The selected output ports change the setting at the same time.
By using Terminal:
Baud rate: | 9600 |
Data length: | 8bit |
Parity check: | No |
Stop bit: | 1 |
Command Set:
COMMAND | ACTION |
| COMMAND | ACTION |
| COMMAND | ACTION |
ST | System Status* |
| C5 | Output C select Input5 |
| F3 | Output F select Input3 |
VR | Firmware Version |
| C6 | Output C select Input6 |
| F4 | Output F select Input4 |
A1 | Output A select Input1 |
| C7 | Output C select Input7 |
| F5 | Output F select Input5 |
A2 | Output A select Input2 |
| C8 | Output C select Input8 |
| F6 | Output F select Input6 |
A3 | Output A select Input3 |
| D1 | Output D select Input1 |
| F7 | Output F select Input7 |
A4 | Output A select Input4 |
| D2 | Output D select Input2 |
| F8 | Output F select Input8 |
A5 | Output A select Input5 |
| D3 | Output D select Input3 |
| G1 | Output G select Input1 |
A6 | Output A select Input6 |
| D4 | Output D select Input4 |
| G2 | Output G select Input2 |
A7 | Output A select Input7 |
| D5 | Output D select Input5 |
| G3 | Output G select Input3 |
A8 | Output A select Input8 |
| D6 | Output D select Input6 |
| G4 | Output G select Input4 |
B1 | Output B select Input1 |
| D7 | Output D select Input7 |
| G5 | Output G select Input5 |
B2 | Output B select Input2 |
| D8 | Output D select Input8 |
| G6 | Output G select Input6 |
B3 | Output B select Input3 |
| E1 | Output E select Input1 |
| G7 | Output G select Input7 |
B4 | Output B select Input4 |
| E2 | Output E select Input2 |
| G8 | Output G select Input8 |
B5 | Output B select Input5 |
| E3 | Output E select Input3 |
| H1 | Output H select Input1 |
B6 | Output B select Input6 |
| E4 | Output E select Input4 |
| H2 | Output H select Input2 |
B7 | Output B select Input7 |
| E5 | Output E select Input5 |
| H3 | Output H select Input3 |
B8 | Output B select Input8 |
| E6 | Output E select Input6 |
| H4 | Output H select Input4 |
C1 | Output C select Input1 |
| E7 | Output E select Input7 |
| H5 | Output H select Input5 |
C2 | Output C select Input2 |
| E8 | Output E select Input8 |
| H6 | Output H select Input6 |
C3 | Output C select Input3 |
| F1 | Output F select Input1 |
| H7 | Output H select Input7 |
C4 | Output C select Input4 |
| F2 | Output F select Input2 |
| H8 | Output H select Input8 |
16