IBM RS/6000 SP manual Service Request Number, Failing components Description

SP Switch function (MAP 0620)

vIf yes:

a.An SRN was obtained from diagnostics.

b.Use the following SRN table (Table 1-9)to continue service.

c.After using Table 1-9,go to ªStep 0620-012º on page 1-26.

vIf no:

a.The diagnostics did not detect a problem, therefore the problem is in SP Switch.

b.Go to ªStep 0620-041º on page 1-35.

Table 1-9. Service Request Number (SRN) table for SP Switch adapters

	SRN
Service Request Number	source	Failing component(s)				Description
	D	762-100				Problem detected with device or
		through				device data corrupted. You may
		762-199SPS adapter				need to reinstall ªssp.cssº code.
		software
		system		or I/O	planar
762-200	D	external		clock		Problem detected with external
through		SPS	adapter			clock.
762-299		(wrap	plug)
762-2A0	D	SPS adapter				Problem detected with internal
through						clock.
762-2A9
762-300	D	SPS adapter				Problem detected with POS
through		system		or I/O	planar	registers.
762-399
762-400	D	SPS	adapter			TBIC test failed.
through		software
762-499
762-500	D	SPS adapter				SRAM test failed.
through
762-599
762-600	D	SPS adapter				Microprocessor test failed.
through
762-699
762-700	D	SPS adapter				Interrupt test failed.
through
762-799
762-800	D	SPS adapter				FIFO test failed.
through
762-899
762-900	D	SPS adapter				DMA engine test failed.
through		I/O planar
762-999		data	cable
762-Ax3	D	SPS	adapter			Card wrap test failed.
(See note)		(terminator)
762-Ax4	D	SPS	data cable			Cable wrap test failed.
(See note)		(wrap	plug)
763-1xx	D	SPS MX adapter				Problem detected with a device
(See note)		software				or device data corrupted.
		system		or I/O	planar	Note: You may need to reinstall
						ssp.css software.

1-24RS/6000 SP: SP Switch Service Guide