9. PRESENTER (TUP482 series only)
In order to eject the paper after it is printed and cut, a presenter can be installed on the front of the cut-
ter.
Item | Specification |
|
|
Possible sheet length | Approx. 80 mm (min.) |
Setting | The presenter is installed and bit 8 of MSW5 is set to “1” at the time of |
| shipping. (Bit 0 of MSW5 is also set to “1” for the open frame.) |
Operation sequence | a. The paper is not ejected during printing. |
(viewed from the | b. The cutter cuts the end of the paper after printing is completed. |
operator’s side) | c. The presenter’s roller rotates for 5 seconds, which causes the sheet to |
| be ejected from the exit. The sheet stops when the end leaves the |
| roller. |
| d. The next printing step starts when the sheet is removed by the operator. |
| e. If the sheet is not removed within 5 seconds, the roll begins to rotate. |
| If the status end request (EOT) is sent from the host computer while |
| the sheet is remains at the exit, the host computer will return to status |
| E5. |
|
|
– 20 –