11. POWER REQUIREMENTS
The input voltage shall be DC 24 V ± 7% (rated 2.5 A, less than 6 A/15 sec.). The current used when solid printing is performed is shown below.
12A
T
8A
T
12A
T
Block 1 (384 dots)
Block 2 (256 dots)
8A
T
0.5A
0.5A
Cycle 2.5ms
Item |
|
| Specification | |
|
|
|
| |
T (weld time) | approx. 550 ms (25C, standard density) | |||
| Max. 800 ms depending on the conditions | |||
Current (during solid | Peak current: 12 A max. | |||
printing) | Average current: 6.6 A max. | |||
|
|
|
| |
|
| 12 ⋅ 0.8 + 8 ⋅ 0.8 + 0.5 ⋅ (2.5 – 0.8 ⋅ 2) | ||
|
|
|
|
|
|
|
| 2.5 |
|
|
|
|
|
|
Item |
|
| Specification | |
|
|
|
| |
Recommended power | For 100 or 120 V Star Micronics Power Supply Unit | |||
supply |
|
| (Part number: 87393030) | |
| For 230 V | Star Micronics Power Supply Unit | ||
|
|
| (Part number: 87393090) | |
|
|
|
|
|
– 22 –