Star Micronics SP2000 manual DSW 1 Digits Per Line

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Selects IBM character set #2

<ESC> "6"

(1B)H (36)H

Selects IBM character set #2.

Switches from IBM character set #1 to character set #2.

Subsequent 80H to 9FH codes are handled as character data. This command is invalid when the character code table settings are other than #1.

Selects IBM character set #1

<ESC> "7"

(1B)H (37)H

Selects IBM character set #1.

Switches from IBM character set #2 to character set #1.

Subsequent 80H to 9FH codes are handled as character data. This command is invalid when the character code table settings are other than #2.

Selects 7 X 9 (half dot) font (Default)

<ESC> "M"

(1B)H (4D)H

Selects 7 X 9 (half dot) font.

When the power of the printer is turned on, 7 X 9 (half dot) printing is automatically selected.

The number of digits per line is set by the DIP switches in the following way.

DSW 1 - 5	Digits Per Line
ON	42
OFF	40

(When right space of character is 0.)

10