Star Micronics SP2000 manual Sub

FUNCTION

CODE

OUTLINE

NOTE

FUNCTION

CODE

OUTLINE

NOTE

FUNCTION

CODE

OUTLINE

NOTE

Controls peripheral device #1 immediately

<FS>

(1C)H

Executes drive pulse for peripheral unit 1 (immediate).

This code differs from the <BEL> code as follows:

When the printer receives an <FS> code, the command is executed immediately. The <BEL> code is stored in the data buffer in the same manner as other codes, and executed in the order in which they are received.

Immediate drive command for peripheral unit 2

Peripheral Units 1 and 2 cannot be driven simultaneously.

Controls peripheral device #2 immediately

<EM>

(19)H

Drives peripheral unit 2. Pulse width is fixed at 200 ms with a

fixed delay time of 200 ms.

When the printer receives a <EM> code, the command is executed immediately. Same as <SUB>.

Peripheral Units 1 and 2 cannot be driven simultaneously.

Controls peripheral device #2 immediately

<SUB>

(1A)H

Drives peripheral unit 2. Pulse width is fixed at 200ms with a fixed

delay time of 200 ms.

When the printer receives a <SUB> code, the command is executed immediately. Same as <EM>

Peripheral Units 1 and 2 cannot be driven simultaneously.

32