Star Micronics SP2000 manual Print Sample

Print Sample

FUNCTION

CODE

DEFINITION RANGE

OUTLINE

First, since the volume of data is 30, n1 = (1E)H. If the data m1 to

m30 is converted to hexadecimal, it appears as shown below.

Data	Binary	Hex	Data	Binary	Hex	Data	Binary	Hex
m1	00000001	01	m11	00111110	3E	m21	00111110	3E
m2	00011110	1E	m12	00000010	02	m22	00101110	2E
m3	00111110	3E	m13	00000010	02	m23	00101110	2E
m4	01011111	5F	m14	00111110	3E	m24	00111110	3E
m5	00011111	1F	m15	00111110	3E	m25	00101111	2F
m6	01011110	5E	m16	00101111	2F	m26	00101111	2F
m7	00011110	1E	m17	00101111	2F	m27	00111110	3E
m8	00111111	3F	m18	00111110	3E	m28	00111110	3E
m9	00101111	2F	m19	00101110	2E	m29	00000010	02
m10	00111110	3E	m20	00101110	2E	m30	00000010	02

8 dot high density graphics

<ESC> "L" n1 n2 m1 m2...

(1B)H (4C)H n1 n2 m1 m2...

1 <= n1 + 256 X n2 <= 420 (DIP SW 1-5 = ON))

1 <= n1 + 256 X n2 <= 400 (DIP SW 1-5 = OFF)

Executes double density bit image printing (half-dot printing)

determined by "n1" and "n2". The total number of bit image data bytes in one line is equal to n1 + n2 X 256. Refer to <ESC> K as to the relation between the dot position and the bit number. The printer ignores any data bytes over the specified amount allowed in one line. Pringing is uni-directional.

The printer does not print adjacent dots. When the bit image printing is finished, the printer automatically returns to the character mode.

26