SATO 200i manual Computer Setup, Network Connections

Unit 3: Interface Secifications

COMPUTER SETUP

Perform the following procedure to configure the host computer for AD-HOC interface connectivity.

1.At the host computer, access Control Panel and then Network Connections.

2.When the Network Connections screen (Figure 3-6) appears, ensure the icon to the left of “Wireless Network Connection” does not have a red X over it. Proceed to step 3 if so, exit if not.

Figure 3-6, Network Connections

3.Click on the icon mentioned in step 2 to proceed to the Wireless Network Connection Properties screen (Figure 3-7a/b).

4.Click on the Wireless Networks tab to view that menu, then on the Advanced button.

Figure 3-7a/b, Wireless Network Connection Properties

SATO MB2i Service Manual PN 9001145B Page 3-12