Unit 8: Adjustment Procedures
DEFAULT SETTING MODE
The Default Settings Mode allows the printer to be returned to factory defaults. This process does not however, affect the printer’s internal counters. Host to printer interface connection is required.
The figure below provides the specific sequence of events required by the operator and the printer.
Refer to Figure
(DSW = 1: OFF, 2: OFF, 3: OFF, 4: OFF) + Cover Open +
PRINT + POWER
Flashes orange and enters the Default Setting Mode.
Blinks green while Default
Setting in progress.
Flashes green when Default
Setting is complete.
Confirm light is green and press
POWER.
Printer shuts down.
Figure 8-3, Default Setting Mode
SATO MB2i Service Manual | PN 9001145B | Page |