SATO 200i manual 12a/b, Ports

Unit 3: Interface Specifications

14.Alter the following fields as necessary:

•IP Address: Change to 150.100.100.11 .

•Subnet Mask: 255.255.255.0 (should always be the same)

15.Click on the OK button to exit the Internet Protocol (TCP/IP) screen.

16.When the Wireless Network Connection Properties screen (Figure 3-9) reappears, click on the OK button to exit.

17.To test the ad-hoc wireless connection, perform the following procedure:

1.Access Control Panel/MB200i Print Driver/Printer and Faxes, then click on MB200i Printer Driver.

2.When SATO MB200i Properties screen (Figure 3-12a) appears, select Ports tab.

3.When the Ports menu (Figure 3-12b) appears, click on the Add Port button.

Figure 3-12a/b, Ports

4.When the Printer Ports screen (Figure 3-13) appears, select the Standard TCP/IP Port option followed by the New Port button.

Figure 3-13, Printer Ports

SATO MB2i Service Manual PN 9001145B Page 3-15