Hardware Installation for Connection to Your local network
1.Power off your network devices.
2.Locate an optimum location for the AP. The best place for the AP is usually at the center of your wireless network, with line of sight to all of your wireless devices.
3.Adjust the antennas. Normally, the higher location of your AP will get better the performance.
4.Using a standard Ethernet network cable, connect the AP’s Internet port to your broadband modem.
5.Connect your network PCs or Ethernet devices to the AP’s LAN ports using standard Ethernet network cabling.
6.Connect the AC power adapter to the AP's Power port. Then connect the other end to an electrical outlet. Only use the power adapter supplied with the AP. Use of a different adapter may cause product damage.
7.The Hardware installation is completed, please refer to the following content for AP configuration.
User’s Guide | 8 |