Star Micronics NX-2400 user manual Enable printing of all character codes, Select s/ash zero

n	Character	set	n	Character		set
0	U.S.A		7	Spain	I
1	France		8	Japan
2	Germany		9	Norway
3	England		10 Denmark			II
4	Denmark	I	11	Spain	II
5	Sweden		12 Latin		America
6	Italy		13 Denmark/Norway

The first eight of these character sets (from U.S.A. to Spain I) can be selected as power-up defaults by DIP switches 2-2 to 2-4.

Enable printing of all character codes

Mode	ASCII				Decimal	Hexadecimal
IBM	< ESC >	“\”	nl	n2	27 92 nl n2	1B SC nl n2

Enables printing of all characters in the IBM character set, including those assigned to character codes which are normally considered control codes. This command remains in effect for the next nl + n2 x 256 characters, where nl and n2 are numbers between 0 and 255. During this interval no control functions are executed. If a code with no assigned character is received, the printer prints a space.

Enable printing of a// character codes on next character

Mode	ASCII		Decimal	Hexadecimal
IBM I	cEfjC>	‘cn’r	27 94	IlB 5E

This command operates like < ESC > “\” except that it remains in effect for only one character.

Select s/ash zero

Mode	ASCII				Decimal			Hexadecimal
Both	‘ESC’	“ L 7.	“ 1”	27	126	49	1B	7E	31
	<ESC>	“ _ 1,	<I>	27	126	1	1B	7E	01

Causes subsequent zero characters to be overprinted with a slash.

Select normal zero

Mode	ASCII				Decimal			Hexadecimal
	<ESC>	“ - >1	“0”	27	126	48	1B	7E	3b
Both
	<ESC>	“_*’ <o>		27	126	0	1B	7E	00

Causes subsequent zero characters to be printed normally (0), without a slash.

62