Star Micronics NX-2400 user manual Super/subscript character

By moving the cursor and pressing the Fl, F2, and F3 keys you can quickly build up the dot pattern. If necessary you can clear all dots by pressing F4 and start over. When the character is complete, press Return to store the dot data in the computer’s memory. The program will clear the character box and ask you to select the next character to design.

When you have finished designing characters, press the F6 key. The

program will ask you whether you want to save, download, and print the characters you have designed. If you answer Yes to all three questions, your

characters will be saved on a disk file and downloaded to the printer, and

the entire character set from character 33 (!) to character 126( -) will be printed out.

At any point while you are selecting or designing characters you can press F5 to skip the current character and proceed to the next character.

The program does not allow you to redefine the space character, or to

define any other character as an all-blank character. Nor can you assign character codes less than 33 or greater than 126 to the characters you define.

Super/subscript character

I 27 8 910II121314/51617181920212223

ASCII Code: 60

Left space: 7

Character width: 23

Right space: 6

igure C-2. Telephone symbol, super/subscript