Xantrex Technology GT100E owner manual Date and Revision

Page 4

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with products from 50 watt mobile units to one MW utility-scale systems for wind, solar, batteries, fuel cells, microturbines, and backup power applications in both grid-connected and stand-alone systems. Xantrex products include inverters, battery chargers, programmable power supplies, and variable speed drives that convert, supply, control, clean, and distribute electrical power.

Trademarks

GT100E MS Combiner Box for Master/Slave Configuration is a trademark of Xantrex International. Xantrex is a registered trademark of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners and are used herein for identification purposes only.

Notice of Copyright

GT100E MS Combiner Box for Master/Slave Configuration Owner’s Manual© January 2005 Xantrex International. All rights reserved.

Disclaimer

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC. (“XANTREX”)

(a)MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION.

(b)ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK.

Date and Revision

January 2005 Revision A

Part Number

152602

Contact Information

Telephone:	1 800 670 0707	(toll free North America)
	1 360 925 5097	(direct)
Fax:	1 800 994 7828	(toll free North America)
	1 360 925 5143	(direct)
Email:	customerservice@xantrex.com
Web:	www.xantrex.com

Image 4

Contents GT100E MS Combiner Box for Master/Slave Configuration Page GT100E MS Combiner Box for Master/Slave Configuration Date and Revision Audience Purpose ScopeOrganization Conventions Used Related InformationImportant Safety Instructions Page Contents Viii Figures Page Introduction Difference between Configured Master/Slave and Operational Master/Slave ConfigurationGT100E MS Combiner Box Master/Slave Operation States Master UnitMis-configuration of Units Fault ConditionInstallation Unpacking the GT100E MS Equipment RequiredTo unpack the GT100E MS from the shipping pallet 1GT100E MS Componenets Mounting Instructions To mount the MS100E combiner box onto a wallCable Installation Wire Gauge and Torque SpecificationsMS100E Connections PV Array and GT100E Connections To make PV Array #1 and GT100E #1 connections 5PV Array #1 and GT100E #1 ConnectionsTo make PV Array #2 and GT100E #2 connections 6PV Array #2 and GT100E #2 ConnectionsGT100E MS Control Power Cable To make GT100E MS Control Power Cable connections8Location of GT100E MS in the GT100E To install the GT100E MS Interface Assembly 9GT100E MS Interface Assembly InstallationTo install the MS100E Interface Assembly Cable To install the MS100E Control Power and Interface CableGT100E Unit Installation To install the MS100E Interface Assembly for GT100E #2Configuration To set a unit up as the Master Unit To set a unit up as the Slave Unit Configuration Limited Warranty What does this warranty cover and how long does it last?How do you get service? What will Xantrex do?Exclusions What does this warranty not cover?Limitations on Exclusions Out of Warranty Service Exclusion for DocumentationWA-4 Page Xantrex Technology Inc