Fujitsu ST5111, ST5112 manual IP address information

Page 75

W i r e l e s s L A N U s e r ’ s G u i d e

IP address information

IP addressing is much more complicated than can be briefly explained in this document. You are advised to consult with your network administrator for additional information.

If IP address is unknown, set IP address as follows:

If you have an access point (DHCP server) on the network, set the IP address as follows:

[Obtain an IP address automatically]

A DHCP server is a server that automatically assigns IP addresses to computers or other devices in the network. There is no DHCP server for the AdHoc network.

If the IP address is already assigned to the computer in the network, ask the network administrator to check the IP address to be set for the computer.

If no access point is found in the network:

An IP address is expressed with four values in the range between 1 and 255.

Set the each computer as follows: The value in paren- theses is a subnet mask.

<Example>

Computer A: 192.168.100.2 (255.255.255.0)

Computer B: 192.168.100.3 (255.255.255.0)

Computer C: 192.168.100.4 (255.255.255.0)

:

:

Computer X: 192.168.100.254 (255.255.255.0)

67

Image 75
Contents User’s Guide Page OmniPass is a trademark of Softex, Inc Copyright and Trademark InformationSystem Disposal Important Safety InstructionsAC Adapter output polarity For Authorized Repair Technicians OnlyTable of Contents Appendix B Security Device USER’S Guide Preface Page Fujitsu Contact Information Limited Warranty InformationPreface About this GuidePage Getting Started with Your Tablet PC Page Getting Started with Your Stylistic Tablet PC Optional AccessoriesInfrared keyboard/mouse ports The infrared ports Stylistic Tablet PC FeaturesBack Features Top Features Left-Side Features Right-Side Features Icon Mode/State LED State Remarks Status DisplaySystem Status Indicators Application Buttons Utility Control Panel -Tablet Button SettingsTablet Button Settings MenuNavigation Buttons Navigation ButtonsSame as if you had tapped F2 on a keyboard Tertiary Functions of Application and Navigation ButtonsSetting UP the Security Panel PasswordsSecurity Functions of Application Buttons Precautions Using Your Security PanelUninstalling the Security Panel Application User Fujitsu Driver Update UtilityReinstalling the Security Panel Application Recommend that you install the ClickMe! utility the firstConnector Tablet PC Purpose Peripheral Connectors and Peripheral InterfacesPeripheral Connectors/Interfaces Page Using Your Stylistic Tablet PC Page System States Using the Stylistic ST5100 Series Tablet PCRegistering Windows Vista with Microsoft Powering UP the Tablet PCBooting the System the First Time Starting Windows Vista the first timeRegistering Windows XP with Microsoft Shutting Down the SystemSuspending System Operation Registering Your Stylistic Tablet PC with FujitsuFrom Hibernate mode Power icon is blinking Standby modePower icon is not displayed Hibernate mode From Standby modeAdjusting the Display Brightness Using the Shock Sensor UtilityTip Switch Pen Tether Attachment Point Using the PENReplacing the PEN TIP Installing a PEN TetherCharging the Battery Calibrating the PENOperation of the Bridge Battery Removing and Installing the BatteryTips for Conserving Battery Power Battery uses Lithium ion battery cells which haveModem Connection Memory STICK/SD Card SlotPC Card Slot Removing a PC Card Removing and Installing MemoryInstalling a Memory Module To install a Dimm module in the Tablet PCRemoving a Memory Module Installing a Dimm ModulePage Care and Maintenance Page Care and Maintenance Caring for Your Tablet PCProtecting the Display Screen Avoiding Overheating Storing the Tablet PCTroubleshooting Cleaning the Display ScreenBoot Priority Change Restoring the PRE-INSTALLED SoftwareConfiguring Peripheral Interfaces Re-Installing Individual Drivers and ApplicationsAbout Fujitsu Driver Update Automatically Downloading Driver UpdatesProcedure Check for updates nowPage System Specifications Page Processing Specifications Stylistic ST5100 Series Hardware SpecificationsPower Specifications FCC Notices Regulatory InformationAvis Aux Utilisateurs Du Réseau Téléphonique Canadien Appendix a Page FCC Regulatory Information Wireless LAN Modes Using this Wireless Module Before Using the Wireless LANWireless LAN Devices Covered by this Document Characteristics of the Wlan DeviceStopping Transmission How to Handle This Wireless ModuleDeactivation using the wireless switch Deactivation using WindowsStarting Transmission Atheros Wireless LANConnecting to a Network with Windows Vista Connecting the WlanConfiguring the Wlan With Windows Vista Configuring the Wlan Using Windows XPField Name Description Configuring Using Atheros Client Utility SoftwareSetting the network Setting TCP/IPConnection to the Network Confirming the computer and work group names Setting the sharing functionSetting the Microsoft network-sharing service Setting the file-sharing functionNetwork Name Ssid Setting the printer-sharing functionConfirming connection Confirming the status of the radioBand Frequency ModeSecurity SpeedConnection TroubleshootingUnavailable NetworkSoon after Access pointCommunication Is disconnectedWireless LAN Glossary Wi-Fi Open system authenticationShared key authentication Ssid Service Set IdentifierIP address information Specifications SpecificationsWarranty Using the Bluetooth DeviceWhat is BLUETOOTH? Where to Find Information about BluetoothPage Appendix B Page Getting Started Installing OmnipassInstalling the OmniPass Application Introducing Fingerprint Sensor DeviceVerifying Information about OmniPass Uninstalling OmniPassMaster Password Concept User EnrollmentBasic Enrollment Using OmnipassPassword Replacement OmniPass Authentication ToolbarLogging in to a Remembered Site Remembering a PasswordOmniPass User Identities Configuring OmnipassPassword Management Identities and Password ManagementThings to Know Regarding Import/Export Omnipass Control CenterExporting an OmniPass User Profile Importing an OmniPass User ProfileFirst option, Automatically log on to OmniPass as User SettingsSystem Settings Cannot add a User with a Blank Password to OmniPassEnabling the Security Chip in Bios Trusted Platform Module InstallationInstalling the TPM Applications ProcedureAdjusting the display brightness Air flow vents Battery powerIndex Microphone jack Pen tether Peripheral connectorsSetting up Security Panel Shock Sensor Utility Stylistic ST5000 specificationsUSB ports Using the pen Wireless LAN/Bluetooth on/off switchTurning off the system Y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C Page Page