Fujitsu ST5111, ST5112 Automatically Downloading Driver Updates, Procedure, Check for updates now

Page 51

3.Arrow down to the Boot Device Priority submenu. Press [Enter].

4.If “Optical Media Drive” or “CD-ROM Drive” is not at the top of the list, arrow down to the drive in the list, and press the space bar (or the + key) to move it to the top of the list. (The system attempts to boot from the devices in the order in which they are listed.). Note that the BIOS for some systems will indicate “CD-ROM Drive”, even when a DVD drive is connected.

5.If you have an external DVD drive connected, proceed to the next step; otherwise, proceed to step 7.

6.If you have an external DVD drive connected:

•Select the Advanced menu in the BIOS window.

•Scroll down to the USB Features submenu and press the Enter key to open it.

•If Legacy USB Support is disabled, press the space bar to enable it.

•Scroll down to SCSI SubClass Support and press the space bar to enable it.

7.Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process.

After you have changed the boot priority, you can restore a backup image when you are booting up.

Procedure

1.Turn on the power to your system.

2.Ensure that you have a device that can read DVDs either installed in your system or attached externally to it.

3.Insert the Restore Disc into the drive tray.

4.Reboot your system.

5.After the system reboots, follow the instructions that appear to either restore your system image or erase all data from your hard disk.

C a r e a n d M a i n t e n a n c e

AUTOMATICALLY DOWNLOADING DRIVER UPDATES

Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system.

The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). If the FDU icon does not appear in the system tray, it can be started by going to [Start] -> All Programs, and clicking on Fujitsu Driver Update; this will create the icon automatically.

To invoke the FDU menu, right-click on the FDU icon. The menu contains the following items:

■Check for updates now

Allows for manual driver update search. The first time it is used, you are prompted to agree to a user agree- ment. After clicking on the icon, the FDU automati- cally connects with the Fujitsu site to check for updates and downloads them. While downloading, the icon has a red bar through it, indicating that it cannot be used while the download is in process. When the update is complete, a message appears informing you of the fact.

■Enable Automatic Update Notifications Automatically searches for new updates on a regular basis (approximately every 3 days).

■Show update history

Brings up a screen that displays a history of updates that have been made via the FDU.

■About Fujitsu Driver Update

Displays the FDU version number and copyright information

■Fujitsu Driver Update Readme Displays the FDU readme.

43

Page 50 Page 52
Image 51
Page 50 Page 52
Contents User’s Guide Page OmniPass is a trademark of Softex, Inc Copyright and Trademark InformationSystem Disposal Important Safety InstructionsAC Adapter output polarity For Authorized Repair Technicians OnlyTable of Contents Appendix B Security Device USER’S Guide Preface Page Fujitsu Contact Information Limited Warranty InformationPreface About this GuidePage Getting Started with Your Tablet PC Page Getting Started with Your Stylistic Tablet PC Optional AccessoriesInfrared keyboard/mouse ports The infrared ports Stylistic Tablet PC FeaturesBack Features Top Features Left-Side Features Right-Side Features Icon Mode/State LED State Remarks Status DisplaySystem Status Indicators Application Buttons Utility Control Panel -Tablet Button SettingsTablet Button Settings MenuNavigation Buttons Navigation ButtonsSame as if you had tapped F2 on a keyboard Tertiary Functions of Application and Navigation ButtonsSetting UP the Security Panel PasswordsSecurity Functions of Application Buttons Precautions Using Your Security PanelUninstalling the Security Panel Application User Fujitsu Driver Update UtilityReinstalling the Security Panel Application Recommend that you install the ClickMe! utility the firstConnector Tablet PC Purpose Peripheral Connectors and Peripheral InterfacesPeripheral Connectors/Interfaces Page Using Your Stylistic Tablet PC Page System States Using the Stylistic ST5100 Series Tablet PCRegistering Windows Vista with Microsoft Powering UP the Tablet PCBooting the System the First Time Starting Windows Vista the first timeRegistering Windows XP with Microsoft Shutting Down the SystemSuspending System Operation Registering Your Stylistic Tablet PC with FujitsuFrom Hibernate mode Power icon is blinking Standby modePower icon is not displayed Hibernate mode From Standby modeAdjusting the Display Brightness Using the Shock Sensor UtilityTip Switch Pen Tether Attachment Point Using the PENReplacing the PEN TIP Installing a PEN TetherCharging the Battery Calibrating the PENOperation of the Bridge Battery Removing and Installing the BatteryTips for Conserving Battery Power Battery uses Lithium ion battery cells which haveModem Connection Memory STICK/SD Card SlotPC Card Slot Removing a PC Card Removing and Installing MemoryInstalling a Memory Module To install a Dimm module in the Tablet PCRemoving a Memory Module Installing a Dimm ModulePage Care and Maintenance Page Care and Maintenance Caring for Your Tablet PCProtecting the Display Screen Avoiding Overheating Storing the Tablet PCTroubleshooting Cleaning the Display ScreenBoot Priority Change Restoring the PRE-INSTALLED SoftwareConfiguring Peripheral Interfaces Re-Installing Individual Drivers and ApplicationsAbout Fujitsu Driver Update Automatically Downloading Driver UpdatesProcedure Check for updates nowPage System Specifications Page Processing Specifications Stylistic ST5100 Series Hardware SpecificationsPower Specifications FCC Notices Regulatory InformationAvis Aux Utilisateurs Du Réseau Téléphonique Canadien Appendix a Page FCC Regulatory Information Wireless LAN Modes Using this Wireless Module Before Using the Wireless LANWireless LAN Devices Covered by this Document Characteristics of the Wlan DeviceStopping Transmission How to Handle This Wireless ModuleDeactivation using the wireless switch Deactivation using WindowsStarting Transmission Atheros Wireless LANConnecting to a Network with Windows Vista Connecting the WlanConfiguring the Wlan With Windows Vista Configuring the Wlan Using Windows XPField Name Description Configuring Using Atheros Client Utility SoftwareSetting the network Setting TCP/IPConnection to the Network Confirming the computer and work group names Setting the sharing functionSetting the Microsoft network-sharing service Setting the file-sharing functionNetwork Name Ssid Setting the printer-sharing functionConfirming connection Confirming the status of the radioBand Frequency ModeSecurity SpeedConnection TroubleshootingUnavailable NetworkSoon after Access pointCommunication Is disconnectedWireless LAN Glossary Wi-Fi Open system authenticationShared key authentication Ssid Service Set IdentifierIP address information Specifications SpecificationsWarranty Using the Bluetooth DeviceWhat is BLUETOOTH? Where to Find Information about BluetoothPage Appendix B Page Getting Started Installing OmnipassInstalling the OmniPass Application Introducing Fingerprint Sensor DeviceVerifying Information about OmniPass Uninstalling OmniPassMaster Password Concept User EnrollmentBasic Enrollment Using OmnipassPassword Replacement OmniPass Authentication ToolbarLogging in to a Remembered Site Remembering a PasswordOmniPass User Identities Configuring OmnipassPassword Management Identities and Password ManagementThings to Know Regarding Import/Export Omnipass Control CenterExporting an OmniPass User Profile Importing an OmniPass User ProfileFirst option, Automatically log on to OmniPass as User SettingsSystem Settings Cannot add a User with a Blank Password to OmniPassEnabling the Security Chip in Bios Trusted Platform Module InstallationInstalling the TPM Applications ProcedureAdjusting the display brightness Air flow vents Battery powerIndex Microphone jack Pen tether Peripheral connectorsSetting up Security Panel Shock Sensor Utility Stylistic ST5000 specificationsUSB ports Using the pen Wireless LAN/Bluetooth on/off switchTurning off the system Y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C Page Page
Top Page Image Contents