Fujitsu ST5112, ST5111 manual Specifications

S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A

Specifications

Item	Specifications
Type of network	Conforms to IEEE 802.11a/802.11b/g (Wi-Fi based)*
Transfer rate	(Automatic switching)
	54 Mbps maximum data rate
Active frequency	802.11b/g: 2400~2473 MHz
	802.11a: 4900 ~ 5850 MHz
Number of channels	802.11a: 8 independent channels
	802.11b/g: 11 channels, 3 non-overlapping channels
Typical operating distances**	802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps
	802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps
	802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps
Security	Encryption Types - WEP, TKIP, AES***
	WPA 1.0, WPA-2 compliant
	Encryption Key lengths Supported: 64 bits and 128 bits
	802.1x/EAP
Maximum recommended number of computers to	10 units or less ****
be connected over wireless LAN (during ad hoc
connection)

*“Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.

**The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.

***Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104 bits after subtracting the fixed length of 24 bits.

****Depending on practical environments, the allowable number of computers to be connected may be decrease

68