Fujitsu ST4000P manual Checking the full computer name and workgroup, Sharing

5.Set an IP address as indicated in Table 3. Ask your network administrator to check the setting.

Item	Description
For AdHoc	Set the IP address and subnet mask:
Network	Click [Use the following IP address],
	and enter a value for [IP address] and
	[Subnet mask].
	Refer to “Setting IP Addresses” on
	page 58 to set an IP address and
	subnet mask.
For	Select [Obtain an IP address
Infrastructure	automatically]:
Network	For the DNS server, select [Obtain
	DNS server address automatically].
	For the IP address, DNS server, and
	default gateway, follow the network
	administrator's instructions, if any.

Table 3: Setting an IP Address

6.Click [OK]. The [Local Area Connection Properties] window appears again.

7.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

Checking the full computer name and workgroup

1.Click [Start] -> [Settings] -> [Control Panel].

2.Double-click the [System] icon. [System Properties] appears.

3.Click the [Network Identification] tab.

4.Check [Full computer name] and [Workgroup]. Ask your network administrator and check the setting.

Item	Description
Full	A name to identify the computer on
Computer	the network. You can specify any
Name	name to each computer.
	For easier identification, use the model
	name or user name.

W i r e l e s s L A N U s e r ’ s G u i d e

Item		Description
Workgroup	A name for the network group:
	■	AdHoc Network:
		Specify the same name to all com-
		puters within the same network.
	■	Infrastructure Network: Specify a
		workgroup name to connect to.
	To change the setting, click
	[Properties], and follow the instruc-
	tions on the screen. [System Proper-
	ties] appears again.

Table 4: Checking computer name and workgroup

5.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

Sharing

In this section, you set sharing of the drive, folder, and printer.

You only need to set this when you are sharing files or a printer with other computers on the network.

When you share a drive, folder, or printer, you can use them from any computer on the network.

Setting [File and Printer Sharing for Microsoft Networks]

1.Click [Start] -> [Settings] -> [Control Panel].

2.Double-click the [Network and Dial-up Connections] icon. The [Network and Dial-up Connections] windows appears.

3.Right click the [Local Area Connection], then click [Properties] from the menu that appears. [Local Area Connection Properties] appears.

P O I N T

More than one network adapter is installed in your system if more than one [Local Area Connection] entry is displayed. In this case, select the [Local Area Connec- tion] entry with [Intersil PRISM Wireless LAN PCI Card] displayed under [Device Name].

4.If [File and Printer Sharing for Microsoft Networks] is displayed in the list, make sure that it is checked. If it is not checked, check it and click [OK]. You do not have to perform the following steps. Go to the next section, entitled “Sharing Files.”

If [File and Printer Sharing for Microsoft Networks] is not found in the list, click [Install], and perform Step 5 and subsequent steps. When you click [Install], the [Select Network Component Type] window appears.

49