Windows 98 |
6
The dialog box confirms that the
7Click Cancel to leave each dialog box and return to the Control Panel.
Windows 98
To install the network driver in a PC running Microsoft Windows 98, insert EtherDisk Diskette #2 when the Update Device Driver wizard starts and prompts you for a diskette or CD.
Do not insert EtherDisk Diskette #1, because the installation will be unsuccessful.
Continue with the installation by following the prompts on the screen. For instructions, follow the Windows 95 installation steps on page
Confirming Installation
To verify that the network driver was successfully installed in a PC running Windows 98:
1From the Windows Start menu, select Settings, and then select Control Panel.
2
3
If a red X appears next to the name of the adapter, the installation was not successful. If this occurs, verify that the adapter is not disabled by following these steps:
a
c Make sure that Disable in this hardware profile is not selected.