IBM EtherLink XL manual Removing the 3C905B-TX Adapter Pace and 3NICDIAGS Software

B-12APPENDIX B: TECHNICAL SUPPORT

Removing the 3C905B-TX Adapter PACE and 3NICDIAGS Software

You can remove the PACE and 3NICDIAGS software from your PC using Windows 95, Windows NT, or DOS.

Windows 95 and Windows NT 4.0

To remove the PACE and 3NICDIAGS software, follow these steps:

1In the Windows Control Panel, select Add/Remove Programs.

2Select 3Com NIC Diagnostic Utilities.

3Click Add/Remove.

The 3C905B-TX adapter software is removed from your PC.

DOS

To remove the PACE and 3NICDIAGS software, at the DOS prompt, enter:

un3c90x.exe

The program removes the 3C905B-TX adapter software.

Checking the Remote Wake-up Function

If the PC does not boot up when a Magic Packet wake-up packet is sent, perform these general troubleshooting steps:

1Verify that the Wake on Link and Wake on Magic Packet settings are enabled.

a Click the Network Neighborhood icon. b Click Properties.

cDouble-click the 3Com NIC icon and click the Advanced tab.

Make sure that Wake on Link and Wake on

Magic Packet are enabled. If these settings do not exist, either the adapter is not a Remote Wake-Up adapter or the driver installation file is outdated. For the latest 3C905B-TX drivers and installation files, download EtherDisk diskette 3.1 or later from the 3Com Web site:

http://www.3com.com/