IBM EtherLink XL manual 3Com DOS Diagnostic Program, Verify the driver version

Page 53

3Com DOS Diagnostic Program B-13

2Verify the driver version.

The driver must be at least version 2.23.40. a Click Properties.

b Click the Version tab.

cCheck the EL90X.SYS driver version.

If the version is lower than 3.1, download an updated version of the driver from the 3Com Web site:

http://www.3com.com/

3If the version of the driver is up to date, the keywords are enabled, and the PC still does not wake up, check the BIOS.

a Boot the PC and enter the BIOS.

b Locate the Wake-Up on PME signal or Wake-Up on LAN event setting.

cVerify that the setting is enabled.

If you experience difﬁculties locating these settings, consult the reference manual for your PC, or contact your PC vendor.

4Remove the PC cover and check the Remote Wake-Up connection.

Verify that the Remote Wake-Up cable is plugged in to the adapter as well as to the motherboard. Unplug and reinsert the cable if necessary.

5If the adapter still does not wake up, install a known good working Remote Wake-Up adapter and the Remote Wake-Up cable in the PC and recheck the PC.

If the PC works, contact your network vendor for a replacement of the 3Com adapter. After you verify with a known good working adapter that the PC still does not wake up, there may be a problem with the motherboard. Contact your PC vendor.

3Com DOS Diagnostic Program

For information about running the 3Com DOS diagnostic program, see the INSTRUCT.TXT text ﬁle in the HELP directory on EtherDisk Diskette #1.

Image 53

Contents IBM 10/100 Fast EtherLink XL Adapters by 3Com User Guide Page Contents Specifications Accessing the 3C905B-TX Adapter Help System B-6 Page Figures Tables Finding Speciﬁc Information in This Guide About this GuideList conventions that are used throughout this guide Conventions13C905B-TX Adapter IntroductionIndustry-Leading Performance DynamicAccess Software10/100 Mbps Support Installation and ConﬁgurationRemote Wake-Up PC and Server Requirements How Do I Install the 3C905B-TX Adapter?Installing the Adapter 1Inserting the Adapter Secure the adapter with the screw you removed earlierProceed to the next section, Connecting to the Network Connecting to the NetworkReconnect all cables and replace the PC cover Connecting the Remote Wake-Up CableWindows InstallingIf Windows prompts you to reboot, click No Network components should now include Click OK Conﬁrming InstallationClick Yes Click the Device Manager tabWindows Windows NT Upgrading from Windows 95 to WindowsSelect 3Com EtherLink XL NIC Insert EtherDisk Diskette #2. The driver is updatedWindows NT Version Click Add Adapter Click Continue Click CancelAutoLink Requirements NetWare for Windows 3.1x, Windows for Workgroups, and DOSInsert EtherDisk Diskette #1 in drive a Run the Install program. Enter ainstallRunning the AutoLink Program Press Enter to continue the server installation Installing the Novell NetWare Server DriverNetWare Version Select 3Com Fast EtherLink XL 10/100 Ethernet NICMultiple Adapters Network Text File Name Network Driver Name Operating System Supported Network DriversConﬁguration Settings Changing ConfigurationChanging Conﬁguration Settings Displaying Conﬁguration SettingsSelect 3Com NIC Utilities Select 3Com NIC Diagnostics Click NIC Details to display the NIC Details screenChanging Conﬁguration Settings Selecting Pace Applications Changing Pace ConﬁgurationSelect the protocol that the application uses Changing Pace Ranges and ProtocolsPace Advanced Options Using the DOS Conﬁguration ProgramSetting Fast IP Speciﬁcations SpecificationsFigure A-1RJ-45 Connector Pin Assignments RJ-45 Connector Pin AssignmentsTechnical Support Help and Service InformationProblem Solving Placing the Call to IBM Preparing for the CallAdditional Technical Support Resources TroubleshootingStatus LEDs LED Select 3Com NIC Utilities Select 3Com NIC Diagnostics Help 3Com NIC Diagnostics ProgramAccessing the 3C905B-TX Adapter Help System Running the Self-Test Figure B-23Com NIC Diagnostics Program General Screen Eeprom Fifo Running the Echo TestOn both PCs 3Com Support Services3Com NIC Diagnostics Program B-11 Removing the 3C905B-TX Adapter Pace and 3NICDIAGS Software Select 3Com NIC Diagnostic Utilities Click Add/RemoveChecking the Remote Wake-up Function Windows 95 and Windows NTRemove the PC cover and check the Remote Wake-Up connection 3Com DOS Diagnostic ProgramVerify the driver version Cabling Crossover Cable Troubleshooting TipsConnect a straight-through cable from the PC to the hub Troubleshooting Hubs with Crossover Cable QuestionAnswer Frequently Asked QuestionsQuestion Answer Answer Frequently Asked Questions B-19 Accessing the 3Com World Wide Web Glossary DynamicAccess software10/100 auto-negotiation NWay DRMONInﬁnite bursting Full scatter gatherNetwork interface card NIC Pace technologyNumbers IndexVersion World Wide Web WWW Statement of Limited Warranty Extent of Warranty Federal Communications Commission FCC Statement Industry Canada Class B Emission Compliance Statement Unione Europea Directiva EMC Conformidad Electromagnética 3COM END User Software License Agreement