Fujitsu technical manual Mainboard D1562/D1561, Notational conventions, Additional information

Page 11

Mainboard D1562/D1561

Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard.

Additional information

Information on the BIOS Setup and additional descriptions of the drivers are contained:

in the readme files on your hard disk

on the driver floppy disks included

on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".

The programme Acrobat Reader must be installed to be able to open the manuals. You will i find the programme on the CD-ROM directory: utls/acrobat.

For more details please read the according readme.txt files.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

indicates information which is important for your health or for preventing physical ! damage.

indicates additional information which is required to use the system properly.

i

ÊText which follows this symbol describes activities that must be performed in the order shown.

ËThis symbol indicates that you must enter a blank space (press the Space Bar) at this point.

ÚThis symbol indicates that you must press the Enter key.

Text in this typeface indicates screen outputs.

Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters or terms.

A26361-D1562-Z120-2-6319

English - 1

Image 11
Contents Mainboard D1562/D1561 Sie haben Page A26361-D1562-Z120-1-6319 Ausgabe Mai 2003 May 2003 edition Mainboard D1562/D1561 FrançaisTechnisches Handbuch Technical Manual Page Page = USB G/H Übersicht/Overview Mainboard D1562/61Contents Page Additional information Mainboard D1562/D1561Notational conventions Information about boards Important notesInternal ports List of featuresOnboard features Thermal Management and System Monitoring Special featuresHarddisk Password and Harddisk Silent Mode External portsRecovery Bios Logo Boot DeskView / DeskViewOEMInstallation Brief instructions on installing mainboardPrior to installation Brief instructions on installing mainboard Driver installationExternal ports Interfaces and connectorsLAN connector Audio front panel Internal ports and connectorsGraphics port Supported screen resolutions Hard disk connectionSerial ATA internal Power On LEDPin assignment of internal ports Front panelIRQ high asserted ATA interfaceAUX audio Audio S/PDIFCD audio input Audio front panel Stromversorgungsüberwachung / Power supply controlDual channel USB E/F dual channelFan Serial portAdditional power supply ATX12 Power supply ATXReserved switch 3 and switch 4 if present Settings with switches and jumpersRecovering System Bios switch 2 / pin pair Replacing processor Removing and installing processorsTechnical data Add-on modules / UpgradingMounting heat sink System bus MHz DDR400 MHz DDR333 MHz DDR266 MHz Upgrading main memoryMemory clock pulse speed Removing a memory module Installing a memory moduleMonofunctional expansions cards Upgrading AGP screen controllersAdding PCI cards PCI bus interrupts Selecting correct PCI slotAudio Modem Interrupt Line Onboard controller USB 1,1USB 2,0 SMBus AC97Replacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateBios Recovery Recovering System Bios When should a Bios update be carried out?When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers DriversMainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version FlashbioË/p6 Ú Error messagesError messages Missing or invalid Nvram token System battery is dead Replace and run Setup Glossary