Fujitsu D1562, D1561 technical manual Logo Boot DeskView / DeskViewOEM, Recovery Bios

Page 15

List of features

Silent Mode and Harddisk Password are activated in the BIOS Setup. Additional information is contained in the "BIOS Setup" manual.

Logo Boot

A customer-specific logo can be displayed during system booting. The logo is loaded using the LogoFlash tool. The logo can have a size of 640 x 480 pixels with 16 colours. The tool is provided on the CD "Drivers & Utilities" or "Drivers & Utilities enhanced" or is available on the Internet at http://www.fujitsu-siemens.com/mainboards.

DeskView / DeskViewOEM

The network-capable manageability software DeskView/DeskViewOEM* mainly consists of three modules:

•DeskInfo shows the most important device data of the PCs in a network (local and/or on an administrator PC).

•DeskAlert monitors the operability of all major components and triggers alarms if necessary depending on the mainboard variant.

•DeskFlash carries out a BIOS update under Windows.

Recovery BIOS

If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions are provided in the chapter "BIOS Recovery - Recovering System BIOS".

IA-PC

Instantly Available PC ensures fast availability of the PC from an energy-saving mode. Within just a few seconds the PC is in exactly the same state it was in when it was switched off without time-consuming booting. Depending on the operating system, the PC can be switched into an energy-saving mode with applications open by pressing the ON/OFF switch.

A26361-D1562-Z120-2-6319

English - 5

Image 15

Contents Mainboard D1562/D1561 Sie haben Page A26361-D1562-Z120-1-6319 Mainboard D1562/D1561 Français Technisches Handbuch Technical ManualAusgabe Mai 2003 May 2003 edition Page Page = USB G/H Übersicht/Overview Mainboard D1562/61Contents Page Mainboard D1562/D1561 Notational conventionsAdditional information Information about boards Important notesList of features Onboard featuresInternal ports Thermal Management and System Monitoring Special featuresHarddisk Password and Harddisk Silent Mode External portsRecovery Bios Logo Boot DeskView / DeskViewOEMBrief instructions on installing mainboard Prior to installationInstallation Brief instructions on installing mainboard Driver installationInterfaces and connectors LAN connectorExternal ports Audio front panel Internal ports and connectorsGraphics port Supported screen resolutions Hard disk connectionSerial ATA internal Power On LEDPin assignment of internal ports Front panelIRQ high asserted ATA interfaceAudio S/PDIF CD audio inputAUX audio Audio front panel Stromversorgungsüberwachung / Power supply controlDual channel USB E/F dual channelFan Serial portAdditional power supply ATX12 Power supply ATXSettings with switches and jumpers Recovering System Bios switch 2 / pin pairReserved switch 3 and switch 4 if present Replacing processor Removing and installing processorsTechnical data Add-on modules / UpgradingMounting heat sink Upgrading main memory Memory clock pulse speedSystem bus MHz DDR400 MHz DDR333 MHz DDR266 MHz Removing a memory module Installing a memory moduleMonofunctional expansions cards Upgrading AGP screen controllersAdding PCI cards PCI bus interrupts Selecting correct PCI slotAudio Modem Interrupt Line Onboard controller USB 1,1USB 2,0 SMBus AC97Replacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateBios Recovery Recovering System Bios When should a Bios update be carried out?Microcode Update What is a microcode update?When should a microcode update be carried out? Drivers DriversMainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision and Bios Version Bios versionMainboard Revision FlashbioË/p6 Ú Error messagesError messages Missing or invalid Nvram token System battery is dead Replace and run Setup Glossary