Fujitsu D1562, D1561 technical manual Drivers

Drivers

Microcode update under DOS with bootable microcode update floppy disk - brief description

ÊDownload the update file from out website to your PC.

ÊInsert an empty floppy disk (1.44 MB).

ÊRun the update file under DOS (e.g. 1495101.EXE).

ÊA bootable update floppy disk is created. Leave the floppy disk in the drive.

ÊRestart the PC.

ÊFollow the instructions on screen.

To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the processor can be read out.

ÊPress the [F1] key in the BIOS Setup.

The entry CPU / Patch ID is shown on the displayed information page.

A list with the current processors and the related Patch-IDs is available on the Internet.

i	If the processor is not recognised, you also require the microcode update tool for
	processors of the P6 family.

Drivers

Only when no drivers are installed on your system, or you want to update these, proceed as follows:

ÊInsert the CD "Drivers & Utilities Collection" into the CD-ROM drive.

ÊIf the CD does not start automatically, run the START.EXE programme in the main directory of the CD.

ÊSelect DeskUpdate - Fully automatic installation.

ÊFollow the screen instructions.

A26361-D1562-Z120-2-6319 English - 27