Fujitsu MAX3073RC, MAX3036RC, MAX3147RC manual Figures

Contents

Illustrations

Figures

Figure 1.1	Example of SAS system configuration
	(Dual port internal cabled environment)	1-6
Figure 1.2	Example of SAS system configuration
	(Dual port internal backplane environment)	1-6
Figure 3.1	Cylinder configuration	3-2
Figure 3.2	Spare area in cell	3-4
Figure 3.3	Alternate cylinder	3-4
Figure 3.4	Track format	3-5
Figure 3.5	Track skew/head skew	3-6
Figure 3.6	Sector format	3-6
Figure 3.7	Alternate block allocation by FORMAT UNIT command	3-11
Figure 3.8	Alternate block allocation by REASSIGN BLOCKS
	command	3-12
Figure 4.1	Dimensions	4-1
Figure 4.2	HDD orientations	4-2
Figure 4.3	Mounting frame structure example	4-3
Figure 4.4	Limitation of side-mounting	4-4
Figure 4.5	Surface temperature measurement points	4-5
Figure 4.6	Service clearance area	4-6
Figure 4.7	Current waveform (+12V DC)	4-7
Figure 4.8	AC noise filter	4-8
Figure 4.9	Connector location	4-8
Figure 4.10	SAS plug connector overview	4-9
Figure 4.11	Recommended external circuit for Ready LED output	4-11
Figure 6.1	Revision label (example)	6-7
Figure 6.2	Indicating revision numbers	6-8
Figure 6.3	Test flowchart	6-9
Figure 7.1	Format of extended sense data	7-2

x C141-E237