Fujitsu MAX3147RC, MAX3036RC, MAX3073RC manual Tests, Test flowchart

6.2 Maintenance Information

6.2.6Tests

This disk drive can be tested in the following ways:

•Initial seek operation check (See Subsection 6.3.1)

•Operation test (See Subsection 6.3.2)

•Diagnostic test (See Subsection 6.3.3)

Figure 6.3 shows the flow of these tests.

Start

Start self-test by turning the power on

No

Test results OK?

Yes

Execute an operation test using a host computer or test equipment

No

Test results OK?

Check host system (Table 6.2)

Host system normal?

Yes

Replaced or repair disk drive

No

Analyze system-related error

Yes

Disk drive normal?

No

Continue operation

Yes

Execute diagnostic test using a host computer or test equipment

No

Test results OK?

Yes

Test using voltage or temperature stress

No

Test results OK?

Yes

Normal

Figure 6.3 Test flowchart

Analyze disk drive error (Table 6.3)

C141-E237 6-9