Fujitsu MAX3073RC, MAX3036RC, MAX3147RC manual Important Alert Items, Data loss

Important Alert Items

Task			Alert message	Page
Installation	2.	When dismounting the drive which is mounted on the		5-10
		system while power is not supplied to it.
		•	Dismount the drive using the drive mounting/dismounting mechanism,
			etc. of the system.
		•	When storing or transporting the drive, put it in the antistatic bag
			(refer to Section 5.1).
Diagnostics	Data loss
and	Save data stored on the disk drive to other media before requesting repair.			6-5
Maintenance
	Fujitsu does not assume responsibility if data is destroyed during servicing
	or repair.
	Electrical shock
	Never touch the HDDs while power-feeding.			6-5
	Damage
	1.	Always ground yourself with a wrist strap connected to ground before		6-5
		handling. ESD (Electrostatics Discharge) may cause the damage to the
		device.
	2.	Never use a conductive cleaner to clean the HDDs.
	3.	Never remove any labels from the drive or deface them in any way.
	4.	Never remove the PCA.
	5.	Never open the disk enclosure for any reason.
	Damage
	1.	Never remove any labels from the drive.		6-13
	2.	Never open the disk enclosure for any reason. Doing so will void any
		warranties.

iv C141-E237