Fujitsu M3097DE, M3097DG manual Setting IPC pre-set mode

Setting IPC pre-set mode

When you set the using of IPC-2 pre-set mode, you must set as follows:

1Press or and let the scanner display Screen 42.

2 At Screen 42, press			or	to select	<Screen 42>
the document number and press					to
activate the IPC pre-setting. Then the
scanner displays Screen 42-1. Go to
procedure 3. If you want to disable the
IPC pre-setting, select “No” then press
. Finally press			to return to
“Scanner Ready” screen.
3 At Screen 42-1, select “Yes” to activate					<Screen 42-1>
the IPC pre-setting or select “No” to
disable the IPC pre-setting. Note that
when you activate the IPC pre-setting,
the IPC setting by Host computer is
ignored. Finally press				, then the
scanner displays next item, Screen 43.
<Classification of document number>
Document number are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of charcter/ line.
				Background density			Background color
		Normal←			→Dark		Red	Green	Blue
	Normal	q:Normal background			e: Dark background
	−	and character.			and normal-density
					character.
Character
density
	↓	w:Normal background				r: Light character		t: Light character
	Light	and light character.					on red paper.	on green paper.

q- t are the document number set in setup mode.

6-4