Fujitsu M3097DG, M3097DE manual Activating the Setup Mode

Activating the Setup Mode

This section describes how to activate the setup mode.

1 Turn the power ON. Then the scanner	<Screen M1>
displays “Scanner Ready” on LCD.

2	If the scanner is M3097DG, go to the			<Screen M2>
	procedure 3. Press		then the scan-
	ner (M3097DE) displays Screen M2.
3	Press	then the scanner displays
				<Screen M3>
	Screen M3.

4 Press	then the scanner displays	<Screen M4>
Screen M4.

5Press . Now the scanner is at Screen 41 (page 6-3) in Setup mode.

NOTE

Any time you press , you can return to “Scanner Ready” screen.

6-1