Setting double feed detection
When you set the using of double feed detection, you must set as follows:
1 Press | or | and let the | <Screen 41> |
scanner display Screen 41. |
| ||
2At Screen 41, press 
or 
to select the tolerance (10 or 15 or 20mm) and
press 
to activate the double feed detecton. Scanner compares the length of the scanned document with the length of the first document. When the length of the scanned document is longer or shorter than the length of the first docu- ment exceeding the tolerance, double feed is detected. If you want to disable
the double feed, select “No” then press 
. Press 
to return to “Scanner Ready” screen.
NOTE
Double Feed detection is effective only when the length of the all document on ADF is same.
NOTE
Scanner stops document feeding at the double feed detection. When the document in ADF is not the double fed document, previous document may be double fed.
NOTE
If the completely overlapped sheets are fed, the scanner can not detect the double feed.
