Fujitsu M3097DE, M3097DG manual Reset of abrasion counter, Setting pick start time

Reset of abrasion counter

When you reset the abrasion counter, you must set as follows:

1Press or and let the scanner display Screen 43.

2	At Screen 43;				<Screen 43>
	If you want to reset the abrasion counter,
	select “Yes” by		or	button and
	press	. Go to procedure 3.
	If you do not want to reset the abrasion
	counter, select “No” and press				.
	Finally press		to return to “Scanner
	Ready” screen.
3	At Screen 43-1;				<Screen 43-1>
	If you want to reset the abrasion counter,
	select “Yes” and press			. If you do
	not want to reset, select “No” and press
	.

Setting pick start time

When you set the pick start time, you must set as follows:

1Press or and let the scanner display Screen 44.

2 At Screen 44, press	to increase the		<Screen 44>
Pick start time or press	to decrease
the Pick start time. Then press		to
activate the setting. Finally press		to
return to “Scanner Ready” screen.

6-6