IBM 380Z manual Running the Diagnostics, Test

Running the Diagnostics

Use either the TrackPoint or the cursor move keys to interact with the tests.

The following table lists the special tools used in the diagnostics:

Tool	Name	Part Number
PC	test card	35G4703
Tri-Connector wrap plug		72X8546
USB parallel test cable		05K2580

Use either the TrackPoint or the cursor move keys to

interact with				the testsEnter . keyThe works in the same
way	as	when		selectingOK	theicon	to	reply	OK.
1.	Press		and	F1hold; then	turn	on	the	computer. Hold
	F1	down	until the Easy-Setup				menu	appears.

2.Click onTest . The basic diagnostic menu appears.

3.Click on a device to run the test. The test progress window appears; thenOK appears under the tested

device

icon

when

the

test

ends

without

any

errors.

4.

Start Advancedthe

Diagnostic

test

by

pressing

Ctrl +A

on the basic diagnostic menu. The ThinkPad

FRU

connections

window

appears.

5.

Click

onExit

or

pressEsc thekey. The

keyboard

test

window

appears.

6.

When

you

press

a

key, a

mark

appears

or

disappears

on the corresponding key position on the screen.

Repeat

this

step

for

any

key

that needs

to

be tested.

You

can

run

the

keyboard

test

ifCtrl you+K

press

the

keys

at

the

advanced

diagnostic menu.

7.To exit the keyboard tesExit, orclickpresson the

Ctrl +Break keys. The Advanced Diagnostics menu appears.

34