IBM 8870 manual Network Interface, IP Address, Subnet Mask, Gateway, Host Name

Page 69

3.Use the arrow keys to select Ethernet Settings; then, press Enter.

The Ethernet Settings window opens, as shown in the following illustration.

Note: The values in the window are only examples; your settings might be different.

Figure 22. Ethernet Settings window with Web-based remote values

4.Use the arrow keys to navigate to each field. Your system administrator can provide the information for the following fields:

Network Interface

The default value is Enabled; verify that it is still set to Enabled.

IP Address

Type the IP address of the Remote Supervisor Adapter.

Subnet Mask

Type the subnet mask used by the Remote Supervisor Adapter. The default value is 255.255.255.0.

Gateway

Type the IP address of the gateway.

Host Name

Type the host name of the Remote Supervisor Adapter. The default host name is ASMA<burned-in MAC address>.

For detailed information about the Ethernet settings, see the Remote Supervisor Adapter User’s Guide on the IBM xSeries Documentation CD.

5.Change the DHCP Setting field to Disabled. The default value is Enabled.

6.Press F6 to apply the change.

7.Press Esc. After the Warning window opens, press Enter to restart the Remote Supervisor Adapter.

8.Press Esc to return to the Configuration Settings window.

If you need to configure the management port, go to “Configuring the management port for text-based remote access” on page 58.

9.Press Esc to return to the Utility program main window.

Chapter 2. Configuring the server 57

Image 69
Contents ERserver Page ERserver Page Contents Iv xSeries 445 Type 8870 User’s Guide Safety To Connect To Disconnect Do not ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb 82 kg 180 lb XSeries 445 Type 8870 User’s Guide Related documentation Introducing the IBM xSeries 445 serverClick Continue Learn section, click Online publicationsMicroprocessor Features and specificationsWhat your server offers Redundant cooling and power capabilities Light path diagnostics featureLarge data-storage capacity and hot-swap capability Redundant connectionReliability, availability, and serviceability features Active Memory UpdateXpress programMemory scrubbing and Memory ProteXion Memory mirroringIBM Universal Manageability IBM DirectorFront view Server controls, LEDs, and powerXSeries 445 Type 8870 User’s Guide Rear view of model with Remote Supervisor Adapter II-EXA Rear viewRemote Supervisor Adapter II-EXA connectors and LEDs Introducing the IBM xSeries 445 server Turning on the server Server power featuresTurning off the server XSeries 445 Type 8870 User’s Guide Configuring scalable partitions Configuration/Setup Utility programEthernet controller configuration Integrated System Management Processor Update programStarting the Configuration/Setup Utility program Using the Configuration/Setup Utility programConfiguration/Setup Utility menu choices System SummarySystem Information Power-on PasswordProduct Data System Card DataAdvanced Setup Administrator PasswordMemory Settings Start OptionsScalability Port Configuration ASM SettingsScalable Partition Settings Error LogsCreating a scalable partition Configuring scalable partitionsConfiguring the server Deleting a scalable partition Remote console redirectionPower-on password PasswordsAdministrator password ServerGuide features Using the ServerGuide Setup and Installation CDTypical operating-system installation Setup and configuration overviewRSA II-EXA Installing your operating system without ServerGuideUsing the LSI Logic Configuration Utility program Configuring the Gigabit Ethernet controllerUsing ServeRAID Manager Configuration wizard window Configuring the controllerClick Express configuration Using express configurationClick Custom configuration Using custom configurationConfiguration summary window ServeRAID Manager window Viewing the configurationServeRAID Manager help menu Getting assistanceHints and tips feature Identifying the Remote Supervisor Adapter Remote Supervisor AdaptersSetting up the Remote Supervisor Adapter II-EXA Remote Supervisor Adapter II-EXA featuresSetup requirements Step Cabling and configuring the Remote Supervisor Adapter II-EXAUSB connector ASM Interconnect portManagement ports Connect the RSA II-EXA breakout cable to the server Remote Supervisor Adapter II-EXA connectors Restrict to this brand field, select Servers Restrict to this brand field, select Servers Configuring and connecting to the ASM interconnect network XSeries 445 Type 8870 User’s Guide Configuring the server ASM interconnect network Ethernet configuration ASM interconnect network modem configuration Remote Supervisor Adapter features Setting up the Remote Supervisor AdapterCabling and configuring the Remote Supervisor Adapter PPP Remote Supervisor Adapter connectors Settings for Web-based remote IP Address Network InterfaceSubnet Mask GatewayDedicated to ASM Baud RateStop Bits Authentication Protocol Line TypeRemote IP Address Configuring the server If the installation is from a diskette, type a\NT\SETUP -q Select Save New Remote Control Password then, press Enter Using the ASM interconnect networkXSeries 445 Type 8870 User’s Guide Server name ASM Interconnect module needed Server name ASM Interconnect module needed Configuring the server ASM Interconnect network configuration Connecting modems to the ASM Interconnect network Using the PXE boot agent utility program Starting the PXE boot agent utility programPXE boot agent utility menu choices Before you call Using the documentationXSeries 445 Type 8870 User’s Guide Edition notice Appendix B. NoticesIBM TrademarksProduct recycling and disposal Important notesBattery return program European Union EMC Directive conformance statement Industry Canada Class a emission compliance statementTaiwanese Class a warning statement Avis de conformité à la réglementation d’Industrie CanadaXSeries 445 Type 8870 User’s Guide Macedonia former Yugoslav Republic of, Madagascar, Mali XSeries 445 Type 8870 User’s Guide Index LSI Starting server XSeries 445 Type 8870 User’s Guide Page Part Number 02R2784