IBM 8870 manual Configuring the server

Page 73

7.Press Esc to return to the Configuration Settings window. If you need to configure the management port, go to “Configuring the management port for text-based remote access” on page 58.

8.Press Esc to return to the Utility program main window.

9.Use the arrow keys to select Exit Utility from the menu or press Esc to close the Utility program.

10.Remove the diskette from the diskette drive. The server restarts automatically.

11.Continue with “Installing Advanced System Management device drivers.”

Installing Advanced System Management device drivers: You must install the ASM device drivers for the server. The device drivers enable communication between the Remote Supervisor Adapter and the server in which it is installed. You can obtain the most current device drivers from http://www.ibm.com/pc/support.

The following sections describe the procedure for installing the ASM device drivers for the server, depending on your operating system.

Notes:

1. If you are installing device drivers manually, note the following requirements:

vMake sure that the operating system is installed on the server before you install the ASM device drivers. For information about installing the operating system, see the documentation that comes with the operating system.

vBefore installing the ASM device drivers for the Remote Supervisor Adapter, stop any system-management application.

2.If you are using ServerGuide to install device drivers and your operating system is Windows 2000 or Windows Server 2003, ServerGuide installs the ASM device drivers automatically.

vFor Windows 2000 or Windows Server 2003 installations, continue with “Installing Windows 2000 or Windows Server 2003 ASM device drivers”

vFor Windows NT installations, go to “Installing Windows NT ASM device drivers” on page 62.

After you install the ASM device drivers, go to “Configuring the remote control password” on page 63 to set the remote control password.

Installing Windows 2000 or Windows Server 2003 ASM device drivers: To install the ASM device drivers for Windows 2000 or Windows Server 2003, complete the following steps.

Notes:

1.Do not use the Hardware Wizard to install the drivers. If the Hardware Wizard starts itself for the installation of any System Management Driver hardware, exit the Hardware Wizard by selecting Cancel.

2.If IBM Netfinity® Director, IBM Director, or UM Services is running on the server, stop the system-management application before proceeding.

Complete the following steps to manually install the Windows 2000 or WIndows Server 2003 ASM device drivers.

1.Open a command prompt.

2.If you are installing from a diskette, type: a:\WIN2000\SETUP, where a is the drive letter of the diskette drive.

Chapter 2. Configuring the server 61

Page 72 Page 74
Image 73
Page 72 Page 74
Contents ERserver Page ERserver Page Contents Iv xSeries 445 Type 8870 User’s Guide Safety To Connect To Disconnect Do not ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb 82 kg 180 lb XSeries 445 Type 8870 User’s Guide Related documentation Introducing the IBM xSeries 445 serverClick Continue Learn section, click Online publicationsMicroprocessor Features and specificationsWhat your server offers Redundant cooling and power capabilities Light path diagnostics featureLarge data-storage capacity and hot-swap capability Redundant connectionReliability, availability, and serviceability features Active Memory UpdateXpress programMemory scrubbing and Memory ProteXion Memory mirroringIBM Universal Manageability IBM DirectorFront view Server controls, LEDs, and powerXSeries 445 Type 8870 User’s Guide Rear view of model with Remote Supervisor Adapter II-EXA Rear viewRemote Supervisor Adapter II-EXA connectors and LEDs Introducing the IBM xSeries 445 server Turning on the server Server power featuresTurning off the server XSeries 445 Type 8870 User’s Guide Configuring scalable partitions Configuration/Setup Utility programEthernet controller configuration Integrated System Management Processor Update programStarting the Configuration/Setup Utility program Using the Configuration/Setup Utility programConfiguration/Setup Utility menu choices System SummarySystem Information Power-on PasswordProduct Data System Card DataAdvanced Setup Administrator PasswordMemory Settings Start OptionsScalability Port Configuration ASM SettingsScalable Partition Settings Error LogsCreating a scalable partition Configuring scalable partitionsConfiguring the server Deleting a scalable partition Remote console redirectionPower-on password PasswordsAdministrator password ServerGuide features Using the ServerGuide Setup and Installation CDTypical operating-system installation Setup and configuration overviewRSA II-EXA Installing your operating system without ServerGuideUsing the LSI Logic Configuration Utility program Configuring the Gigabit Ethernet controllerUsing ServeRAID Manager Configuration wizard window Configuring the controllerClick Express configuration Using express configurationClick Custom configuration Using custom configurationConfiguration summary window ServeRAID Manager window Viewing the configurationServeRAID Manager help menu Getting assistanceHints and tips feature Identifying the Remote Supervisor Adapter Remote Supervisor AdaptersRemote Supervisor Adapter II-EXA features Setting up the Remote Supervisor Adapter II-EXASetup requirements Step Cabling and configuring the Remote Supervisor Adapter II-EXAASM Interconnect port USB connectorManagement ports Connect the RSA II-EXA breakout cable to the server Remote Supervisor Adapter II-EXA connectors Restrict to this brand field, select Servers Restrict to this brand field, select Servers Configuring and connecting to the ASM interconnect network XSeries 445 Type 8870 User’s Guide Configuring the server ASM interconnect network Ethernet configuration ASM interconnect network modem configuration Remote Supervisor Adapter features Setting up the Remote Supervisor AdapterCabling and configuring the Remote Supervisor Adapter PPP Remote Supervisor Adapter connectors Settings for Web-based remote IP Address Network InterfaceSubnet Mask GatewayDedicated to ASM Baud RateStop Bits Line Type Authentication ProtocolRemote IP Address Configuring the server If the installation is from a diskette, type a\NT\SETUP -q Select Save New Remote Control Password then, press Enter Using the ASM interconnect networkXSeries 445 Type 8870 User’s Guide Server name ASM Interconnect module needed Server name ASM Interconnect module needed Configuring the server ASM Interconnect network configuration Connecting modems to the ASM Interconnect network Starting the PXE boot agent utility program Using the PXE boot agent utility programPXE boot agent utility menu choices Before you call Using the documentationXSeries 445 Type 8870 User’s Guide Edition notice Appendix B. NoticesIBM TrademarksProduct recycling and disposal Important notesBattery return program European Union EMC Directive conformance statement Industry Canada Class a emission compliance statementTaiwanese Class a warning statement Avis de conformité à la réglementation d’Industrie CanadaXSeries 445 Type 8870 User’s Guide Macedonia former Yugoslav Republic of, Madagascar, Mali XSeries 445 Type 8870 User’s Guide Index LSI Starting server XSeries 445 Type 8870 User’s Guide Page Part Number 02R2784
Top Page Image Contents