3.If you are installing from a CD, type: d:\DD\WIN2000\SETUP, where d is the drive letter of the
4.Follow the directions that display on the screen.
5.Go to “Configuring the remote control password” on page 63.
Installing Windows NT ASM device drivers: Select one of the following methods to install the ASM device drivers for Windows NT:
v
The
vInteractive
The normal (interactive) method for installing the ASM device drivers prompts you with instructions and waits for you to respond before continuing with the installation.
Note: If IBM Netfinity Director, IBM Director, UM Services, or IBM Netfinity Manager is running on the server, stop the
Using the
1.Open a Windows NT command prompt; then, type one of the following commands:
vIf the installation is from a diskette, type: a:\NT\SETUP -q
(where a is the drive letter assigned to the diskette drive). Press Enter.
vIf the installation is from a CD, type: d:\DD\NT\SETUP
(where d is the drive letter assigned to the
2.Follow the instructions that appear in the window.
3.Go to “Configuring the remote control password” on page 63.
Using the interactive method: Complete the following steps to use the interactive method.
1.Open a Windows NT command prompt; then, type one of the following commands:
vIf the installation is from a diskette, type: a:\NT\SETUP
(where a is the drive letter assigned to the diskette drive). Press Enter.
vIf the installation is from a CD, type: d:\DD\NT\SETUP
(where d is the drive letter assigned to the
2.Follow the instructions that appear in the window.
3.Continue with “Configuring the remote control password” on page 63.