IBM 8870 manual Baud Rate, Dedicated to ASM

Page 70

10.Use the arrow keys to select Exit Utility from the menu or press Esc to close the Utility program.

11.Remove the diskette from the server. The server restarts automatically.

12.If you also want to configure the management port, continue with “Configuring the management port for text-based remote access.” Otherwise, go to “Installing Advanced System Management device drivers” on page 61.

Configuring the management port for text-based remote access: Complete the following steps to configure the Remote Supervisor Adapter management port for access using a modem or null modem. If you completed the procedure for configuring the Ethernet port and the Configuration Settings window is open, start with step 3.

1.With the server turned off, insert the diskette with the downloaded utility program into the diskette drive; then, turn on the server. The utility starts automatically, displaying the Remote Supervisor Utility window.

2.Use the arrow keys to select Configuration Settings; then, press Enter. The Configuration Settings window opens.

3.Use the arrow keys to select Modem Settings; then, press Enter.

The Modem Settings window opens, as shown in the following illustration.

Note: The values in the window are only examples; your settings might be different.

Figure 23. Ethernet Settings window with text-based remote access values

4.Verify the following management port values:

Baud Rate

The default is 57600. Make sure that the baud rate matches the baud rate of the device you are connecting to the management port on the Remote Supervisor Adapter.

Dedicated to ASM

The default is Disabled. If you are using point-to-point protocol (PPP), set this field to Enabled. If the value in this field is Enabled when the server is restarted, the management port remains dedicated to system management and is not returned to the operating system.

58xSeries 445 Type 8870: User’s Guide

Image 70

Contents ERserver Page ERserver Page Contents Iv xSeries 445 Type 8870 User’s Guide Safety To Connect To Disconnect Do not ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb ≥ 55 kg 121.2 lb 82 kg 180 lb XSeries 445 Type 8870 User’s Guide Introducing the IBM xSeries 445 server Related documentationLearn section, click Online publications Click ContinueFeatures and specifications MicroprocessorWhat your server offers Large data-storage capacity and hot-swap capability Light path diagnostics featureRedundant cooling and power capabilities Redundant connectionReliability, availability, and serviceability features Memory scrubbing and Memory ProteXion UpdateXpress programActive Memory Memory mirroringIBM Director IBM Universal ManageabilityServer controls, LEDs, and power Front viewXSeries 445 Type 8870 User’s Guide Rear view Rear view of model with Remote Supervisor Adapter II-EXARemote Supervisor Adapter II-EXA connectors and LEDs Introducing the IBM xSeries 445 server Server power features Turning on the serverTurning off the server XSeries 445 Type 8870 User’s Guide Ethernet controller configuration Configuration/Setup Utility programConfiguring scalable partitions Integrated System Management Processor Update programConfiguration/Setup Utility menu choices Using the Configuration/Setup Utility programStarting the Configuration/Setup Utility program System SummaryProduct Data Power-on PasswordSystem Information System Card DataMemory Settings Administrator PasswordAdvanced Setup Start OptionsScalable Partition Settings ASM SettingsScalability Port Configuration Error LogsConfiguring scalable partitions Creating a scalable partitionConfiguring the server Remote console redirection Deleting a scalable partitionPasswords Power-on passwordAdministrator password Using the ServerGuide Setup and Installation CD ServerGuide featuresSetup and configuration overview Typical operating-system installationInstalling your operating system without ServerGuide RSA II-EXAConfiguring the Gigabit Ethernet controller Using the LSI Logic Configuration Utility programUsing ServeRAID Manager Configuring the controller Configuration wizard windowUsing express configuration Click Express configurationUsing custom configuration Click Custom configurationConfiguration summary window Viewing the configuration ServeRAID Manager windowGetting assistance ServeRAID Manager help menuHints and tips feature Remote Supervisor Adapters Identifying the Remote Supervisor AdapterRemote Supervisor Adapter II-EXA features Setting up the Remote Supervisor Adapter II-EXASetup requirements Cabling and configuring the Remote Supervisor Adapter II-EXA StepASM Interconnect port USB connectorManagement ports Connect the RSA II-EXA breakout cable to the server Remote Supervisor Adapter II-EXA connectors Restrict to this brand field, select Servers Restrict to this brand field, select Servers Configuring and connecting to the ASM interconnect network XSeries 445 Type 8870 User’s Guide Configuring the server ASM interconnect network Ethernet configuration ASM interconnect network modem configuration Setting up the Remote Supervisor Adapter Remote Supervisor Adapter featuresCabling and configuring the Remote Supervisor Adapter PPP Remote Supervisor Adapter connectors Settings for Web-based remote Subnet Mask Network InterfaceIP Address GatewayBaud Rate Dedicated to ASMStop Bits Line Type Authentication ProtocolRemote IP Address Configuring the server If the installation is from a diskette, type a\NT\SETUP -q Using the ASM interconnect network Select Save New Remote Control Password then, press EnterXSeries 445 Type 8870 User’s Guide Server name ASM Interconnect module needed Server name ASM Interconnect module needed Configuring the server ASM Interconnect network configuration Connecting modems to the ASM Interconnect network Starting the PXE boot agent utility program Using the PXE boot agent utility programPXE boot agent utility menu choices Using the documentation Before you callXSeries 445 Type 8870 User’s Guide Appendix B. Notices Edition noticeTrademarks IBMImportant notes Product recycling and disposalBattery return program Taiwanese Class a warning statement Industry Canada Class a emission compliance statementEuropean Union EMC Directive conformance statement Avis de conformité à la réglementation d’Industrie CanadaXSeries 445 Type 8870 User’s Guide Macedonia former Yugoslav Republic of, Madagascar, Mali XSeries 445 Type 8870 User’s Guide Index LSI Starting server XSeries 445 Type 8870 User’s Guide Page Part Number 02R2784