Step 6. Completing the hardware installation
1.Ensure that the drive is securely mounted and that the connectors are firmly attached.
2.Ensure that the cables do not interfere with the computer cover, and that they do not block the
3.Reinstall the computer cover.
4.Reconnect all external devices.
5.Reconnect all power cords into the electrical outlets.
Step 7. Installing the software
All of the software for the drive is contained on the User’s Guide and Software CD. The User’s Guide and Software CD contains this User’s Guide, IBM RecordNow, IBM Simple Backup, IBM DLA, Intervideo WinDVD and WinDVD Creator Plus. Complete the following procedure to install the software:
1.Insert the User’s Guide and Software CD into the drive. If the CD starts automatically, skip to step 6.
2.If the CD does not automatically start, click Start, and then click Run.
3.Type e:\launch.bat where e is the drive letter of the CD or DVD drive.
4.Click OK.
5.Select your language.
6.Select the software you want to install.
7.Follow the
8.After the software is installed, restart the computer.
Note: For full drive functionality, install all software applications listed in the browser window except the UDF Reader. This is for other computers that do not recognize UDF files.
Step 8. Setting up the system for CD playback
In order to play audio CDs on your drive, you must enable digital playback. Digital playback uses the IDE data cable to send audio data from the drive to your computer instead of using an analog audio cable. This usually results in better playback quality, at the cost of your computer working a little harder to convert the digital data to analog audio. There are two parts to setting up to listen to CD audio, configuring the drive and configuring the playback application.
Configuring the drive for digital playback
If you have Windows XP, your drive should be automatically configured for digital playback.
If you have Windows 2000 or Windows Me, you will need to configure your system to use digital playback. Please refer to the instructions in “Enabling digital audio extraction” on page
Configuring the playback application for digital playback
Your CD playback application must also be configured for digital playback for CD audio to be heard on your system. If you want to use Windows Media Player as your playback application, follow the instructions in “Enabling digital audio extraction” on page
Using the drive
This section contains information on using the
Using recordable media
Your
v
Chapter 2. Installation