IBM 31P6241, 6331-H1N, 6331-J1N, 31P6240 manual PowerSaver, Display Mode

E54-4p.fm Page 11 Tuesday, January 16, 2001 2:19 PM

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State	Normal Operation	Power-off Mode (EPA/ENERGY 2000)
Power Indicator	Green	Green, Blinking (1 sec. interval)
Power	75 W (Maximum)	Less than 3 W
Consumption	61 W (Nominal)

NOTE: This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with a computer equipped with VESA DPMS functionality.

Display Modes

Display Mode	Vertical Frequency (Hz)
IBM, VGA2, 720 x 400	70
IBM, VGA3, 640 x 480	60
VESA, 640 x 480	75
VESA, 640 x 480	85
VESA, 800 x 600	75
VESA, 800 x 600	85
VESA, 1024 x 768	75
VESA, 1024 x 768	85

English - 11

Italiano Portuguese Deutsch Español Français English