Control panel on the global storage cabinet | Controls and indicators |
POWER COMPLETE
This green light is lit up after the system power controller has terminated the switching on sequence without any errors. The light is extinguished when the POWER OFF button is pressed.
SSU CHECK
The display illuminates if there is an error in global storage. The buzzer sounds at the same time.
BATTERY STATUS
These indicators indicate the state of the backup battery:
Name | Color | Meaning | Measure |
BS | green | Backup battery is installed |
|
|
|
|
|
BBON | green | Backup battery is active |
|
|
|
|
|
BI | green | Backup battery is not available |
|
|
|
|
|
DI | green | Data in the global memory are invalid |
|
|
|
|
|
DS | green | Indicator is not in use |
|
|
|
|
|
BE | yellow | Error in backup battery operation | Call service dept. |
|
|
|
|
BF | yellow | Error in the backup battery | Call service dept. |
|
|
|
|
Potentiometer for volume
This is used to set the volume of the buzzer.
Potentiometer for brightness
This is used to set the brightness of the LCD display.
4.2.2 Button functions
LCD BACK LIGHT
The LCD display STATUS (background) is illuminated for five minutes when you press this button. The lights go out immediately when you press this button again.
CANCEL / ALARM STOP
When this button is pressed, the buzzer in the control panel is stopped and the SSU CHECK light is extinguished. If another malfunction occurs after the light is extin- guished, e.g. a machine error or a malfunction in the power supply, the buzzer and the SSU CHECK light are reactivated.
18 |