Fujitsu Siemens Computers BS2000/OSD manual Init CFR File NO. =

Standard processing in SVP mode User frames

FUNCTION => The following functions are carried out by entering the appropriate number:

1	DISPLAY CFR	displays current configuration
2	INIT CFR FILE NO.	activates selected FILE after IMPL, enter a number
		in the INIT CFR FILE NO. => field
3	DISPLAY FILE	displays configuration file, enter a number in the CFR
		FILE NO. => field
X	EXECUTE	executes the last function entered
INIT CFR FILE NO. =>		Selection of a configuration file for function 2
CFR FILE NO. =>		Selection of a configuration file for function 3
0	CL0-SS0, CL1-SS1	configuration file 0 with comments
1	CL0-2SSU	configuration file 1 with comments
2	CL1-2SSU	configuration file 2 with comments
3	2CL-2SSU	configuration file 3 with comments

“Comment” refers to the contents of the configuration file. This is entered by the service department.

The service department can define configuration files in which links between two S130s (Cluster 0 and 1) and two SSUs (SSU0 and SSU1) can be configured on ONL (online Y or N).

A connection (CNCT C) is either set by the service department and IMPL (for OSD V1 and V2) or (as of OSD V3) by operating system commands. figure 33 shows a configuration with which a computer connection can be achieved via global storage (SCMP).

U25339-J-Z126-1-7600 73