Fujitsu Siemens Computers BS2000/OSD manual Problems with the service/console processor SKP

Page 97

Troubleshooting

Problems with the service/console processor (SKP)

8.2 Problems with the service/console processor (SKP)

If you have problems with the SKP, contact the service department and discuss the steps to be taken.

Depending the outcome of this discussion, you may be required to do the following:

1.Reboot the SINIX system.

Make sure that applications under SINIX, e.g. sysadm, have been terminated.

Log in to SINIX under the ID root, enter the password,

shutdown -i6

or select “Exit system“ from the main menu of the window administration program, enter the password, select “Restart” and “Start” (see also page 22).

If this is not possible:

Switch off SKP with the OFF switch and then switch it on again.

A /shutdown command is sent to BS2000 and it may be terminated (see also ! page 22f and the section entitled “up_down” in the “SINIX-2000 V7.0“ [1]

manual).

2. After termination of the SINIX loading process, select the screen CONS0 #1 <computer name> again and log in with the password.

3. If the BS2000/VM2000 is still in operation, an automatic reconnect to the BS2000 console screen CONS0 is executed.

You can now continue to use BS2000 as described on page 89.

U25339-J-Z126-1-7600

97

Page 96 Page 98
Image 97
Page 96 Page 98
Contents Objectives and target group IntroductionNotational conventions Summary of contentsS130 Business Server Global storage Battery unit Safety instructionsImportant instructions Emergency StopRFI suppression Manufacturer instructionsManufacturer instructions Important instructions Configuration levels of the S130 Business Server OverviewModel Number of processors Performance factor Configuration levels of the S130 Business Server OverviewS130-C Processing units S130-E S130-K S130-P S130-T Hardware Concept of system operationConcept of system operation CPUConcept of system operation Overview Software Authorization control Controls and indicators Control panel on the Business Server cabinet Function of the indicators9999 StatusControl panel on the Business Server cabinet Controls and indicatorsLine Displays in line Ffffffffffffffff Displays in line MeaningsSystem Power CompleteCheck Button functions Control panel on the global storage cabinet Control panel on the global storage cabinetLine Displays in line CHK Cnct FfffffffffffffffThese indicators indicate the state of the backup battery Battery StatusSSU Check Emergency Stop switch Emergency Stop switchUse the Emergency Stop switch as follows Emergency StopPage Switching the S130 on and off using the control panel Switching the S130 Business Server on and offSwitching on SKPAuxiliary Frame Load PRESET1 Switching the S130 on and off using the control panelSwitching off Switching the S130 on and off from the SKP Switching the S130 on and off from the SKPSwitching the S130 on and off from the SKP Switching the S130 on and off from the SKP Switching the S130 on and off from the SKP Switching the S130 on and off from the SKP Automatic switching on/off of the S130 via the SKP Automatic switching on/off of the S130 via the SKPAutomatic switching on/off of the S130 via the SKP Time-driven switching on and off of the SKP and S130 Time-driven switching on and off of the SKP and S130Switching the SKP and S130 on and off using Atop Switching the SKP and S130 on and off using AtopSwitching global storage on and off Switching the S130 on and off from a remote systemSwitching the S130 on and off from a remote system DCUStandard processing in SVP mode Invoking an SVP frame Invoking an SVP frame Standard processing in SVP modeInvoking an SVP frame SVPST0 #1 window password entry Password entry window is displayedGeneral frame structure Standard processing in SVP modeGeneral frame structure HOST/GUEST System status messages in lineCL-STOP Meaning of the status messages in line General frame structure Standard processing in SVP modeStatus displays in line Hardware status display in lineDisplays of the emulated terminal 9750 and their meaning Using frames Standard processing in SVP mode Using framesSVP function keys P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 F1 F2 F3 P10Overview of the SVP function keys Using framesLock message Explanation of figure Frames are represented by this symbol Switching between user framesUser frames and subframes User frames Standard processing in SVP modeML Mode Selection Frame Selection of a particular CPU STOP/START Mode =User frames Load Function = LD Program Load Frame BasicAuxiliary Frame Load PRESET-1 Preset GroupLD Program Load Frame DETAIL-1 Load ClearMT Control = IPL from tape Parms =DETAIL-2 Status Cancel the procedureIs not heeded, BS2000 will be shut down abruptly EXA Mode = VM Mode =LD Program Load Frame DETAIL-2 IPL Execution =ST Status Display Frame Cluster P8 Switches to the SSU Frame see nextStatus Display Frame SSU screen P7 Switches to the Cluster Frame see previousRate Control MA Manual Operation FrameAdrs Compare Stop Firmware DumpAdrs Type = Rate Control =Unit Adrs = Adrs SET =AD ALTER/DISPLAY Frame Adrs Comp Mode =Function = ABS Facility =KEY Adrs =FCR PSWFPR PRXMessage Frame screen ME Message FrameCHP no = CH CH/SUBCH Status Display Frame ChannelChpid = 00 ... FFP10 P11 AU Auxiliary Frame Menu Delete input Corrections are carried out by the SVP 8.1 AU1 Auxiliary Frame Real Clock8.2 AU2 Auxiliary Frame Iorsf Control Next Power on Reset NO. =SET no ProtectSets 4 to 7 are displayed Sets 0 to 3 are displayed Specify Swap no8.3 AU3 Auxiliary Frame Related SCB’S Erase input Save input in SVP8.4 AU4 Auxiliary Frame P-OFF/IMPL Power OFFImpl Preset Group 8.5 AU5 Auxiliary Frame Load PRESET1Power on IPL = Load Frame Basic Initial Frame =Load Frame Detail Start IPL no = 8.6 AU7 Auxiliary Frame SSU-CLUSTER ConfigurationCurrent CFR File NO. = Init CFR File NO. =MSF Frame screen MF MSF FrameFrame line PA frame is not intended for use PA Performance AnalyzerEnter the FR AU command in line 24 and press Enter Examples of standard processing in SVP modeSelecting Iorsf Selecting IorsfEnter 2 in the SELECTION= field. Press Auxiliary Frame Menu screen is displayedAuxiliary Frame Iorsf Control screen is displayed On Reset NO.= field and press EnterActivating Iorsf Activating Iorsf Standard processing in SVP modeSet Iorsf must be activated with a Impl Program Load Frame PRESET1 Setting up Program Load Frame PRESET1IPL Device Preset Group Start Mode =Program Load Frame PRESET2 Setting up Program Load Frame PRESET2Executing IPL in Program Load Frame DETAIL-1 You must be in the Auxiliary Frame Load PRESET2 screenMT Control = Load Function = IPL Device = Unit Address =Frame You must be in the Program Load Frame DETAIL-1 screen Setting operating mode via Program Load Frame DETAIL-2Press the P9 key Program Load Frame DETAIL-2 screen appears Setting operating modeStandard processing in SVP mode Selecting the console window Operating the BS2000 consoleSystem operation Page Problems with the S130 TroubleshootingProblems with the S130 Troubleshooting Displays in the case of a hardware errorProblems with the S130 TroubleshootingCarrying out a system dump S130 without the high availability module Measures to take in the case of processing unit failureS130 with the high availability module Following frame is displayed Installation Y/NAre YOU Sure ? Enter Y or N N Problems with the service/console processor SKP Problems with the service/console processor SKPImportant key combinations Important key combinationsTroubleshootingPlease apply to your local office for ordering the manuals Related publicationsSKP / 3970-KAx Operating Manual User GuideData Communication Unit Sinix Data SheetBS2000/OSD-BC Introductory Guide to Systems Support User GuideALTER/DISPLAY Frame AD IndexAtop CH/SUBCH Status Display Frame ChannelIorsf IndexManual Operation Frame MA Mode Selection Frame Mode Selection Frame ML MSF Frame MFMessage Frame ME Program Load Frame Basic LD DETAIL-1 DETAIL-2Status Display Frame ST Cluster Starting ImplSSU Structure of a frame Subframes SVP105 Page Contents Contents 109 101Page Operating Manual S130 Business ServerEdition Jume 111

BS2000/OSD specifications

Fujitsu Siemens Computers BS2000/OSD represents a significant advancement in the realm of enterprise computing, particularly for trusted applications and mission-critical transactions. This mainframe-class operating system is tailored for large corporate environments, delivering reliability, performance, and security essential for contemporary data processing needs.

One of the most notable features of BS2000/OSD is its robust multitasking capabilities. Organizations can run multiple applications concurrently without sacrificing performance, allowing for efficient use of system resources. This is augmented by its advanced partitioning technology, which permits the segmentation of system resources into isolated environments. As a result, applications can be run in parallel, maximizing throughput and optimizing the overall performance of the system.

Security is paramount in any enterprise system, and BS2000/OSD excels in this area. The operating system offers comprehensive security features, including user authentication, access control, and sophisticated auditing tools. These capabilities ensure that sensitive data remains protected while providing users with the necessary permissions to perform their tasks.

BS2000/OSD is designed to support a wide range of technologies, making it highly versatile. Its compatibility with various programming languages, databases, and middleware allows organizations to adopt whatever tools best suit their needs. Furthermore, it integrates seamlessly with virtualization technologies, supporting both legacy applications and modern cloud-based services.

Another critical characteristic of BS2000/OSD is its emphasis on data integrity and fault tolerance. The system is equipped with features such as automatic error detection and correction functionalities. This significantly reduces downtime and enhances system availability—a fundamental requirement for businesses operating in high-stakes environments.

The operating system is also known for its sophisticated backup and recovery options. Data loss can be catastrophic, and BS2000/OSD mitigates this risk through automated backup processes and reliable disaster recovery protocols. This built-in resilience offers peace of mind to organizations that rely heavily on their data assets.

Fujitsu Siemens Computers has consistently focused on enhancing the performance and usability of BS2000/OSD. The user interface, while highly functional, is also intuitive, allowing users, including those not deeply familiar with mainframe systems, to navigate and operate it effectively.

In conclusion, Fujitsu Siemens Computers BS2000/OSD stands out as a powerful, reliable, and secure operating system for enterprise applications. With its multitasking capabilities, robust security features, compatibility with various technologies, and emphasis on data integrity, it remains an ideal choice for businesses seeking to enhance their operational efficiency in an increasingly digital world.
Top Page Image Contents