Cisco Systems OSR-7609, 6509-NEB manual Parts List, Required Tools

Page 3

Parts List

Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing. Statement 1034

Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045

Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last. Statement 1046

Parts List

The following items are included in the upgrade kit:

One high speed fan tray

The high speed fan tray provides additional cooling for the Supervisor Engine 720 and the Supervisor Engine 32.

The high speed fan tray requires external power, either from the 3000 W AC-input power supply or from an external DC power source. The fan tray ships with power wires secured at each terminal block. Use these wires to connect the fan tray to the 3000 W AC-input power supply using the supplied cable, or remove them to connect to a DC power source.

One panel safety cover

The panel safety cover provides increased chassis airflow.

Two fan tray power cables (for AC-input systems)

The fan tray power cable provides a connection between the fan tray and the 3000 W AC-input power supply. Two cables are provided for systems with redundant power supplies.

Required Tools

These tools are required to perform the installation:

Number 1 Phillips-head screwdriver

Number 2 Phillips-head screwdriver

Flat-blade screwdriver (for DC-input systems)

Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note

 

78-16162-02

3

 

 

 

Image 3
Contents Product Number WS-6509-NEB-UPGRD= Safety Overview ContentsRequired Tools Parts ListShutting Down the System Installation GuidelinesAC-Input Systems Replacing the Panel Safety CoverPanel handle Replacing the Fan Tray Installing the Panel Safety CoverRemoving the Fan Tray Removing the Fan TrayHigh Speed FAN Installing the High Speed Fan TrayRemoving an AC-Input Power Supply Replacing the Power SupplyRemoving an AC-Input Power Supply 3000 Watt AC-Input Power Supply Front Panel Installing the 3000 W AC-Input Power SupplyConnecting Power to the Fan Tray Connecting Power to the Fan TrayCable Connectors Installing the Fan Tray Power Cable for AC-Input SystemsTerminal block covers Connecting Site Power to the Fan Tray for DC-Input SystemsRemoving the Terminal Block Cover Removing the Supervisor Engine Replacing the Supervisor EngineInstalling the Supervisor Engine Positioning the Supervisor Engine in the Chassis Clearing the EMI Gasket in the Chassis AC-Input Systems Powering Up the SystemDC-Input Systems Verifying InstallationProduct Documentation DVD Related DocumentationObtaining Documentation Cisco.comDocumentation Feedback Cisco Product Security OverviewOrdering Documentation Obtaining Technical Assistance Reporting Security Problems in Cisco ProductsCisco Technical Support & Documentation Website Submitting a Service RequestObtaining Additional Publications and Information Definitions of Service Request SeverityObtaining Additional Publications and Information