Cisco Systems 6509-NEB, OSR-7609 manual Panel handle

Replacing the Panel Safety Cover

Figure 1 Removing the Panel Safety Cover

Panel handle

105072

Step 3 On the new panel safety cover, grasp the panel handle and press the panel into place, starting at the bottom of the chassis and working up. Be careful not to damage the EMI gasket.

Step 4 Use a number 1 Phillips-head screwdriver to install the 8 panel screws, 4 each located along the top and bottom of the chassis. (See Figure 2.)

Step 5 Proceed to the “Replacing the Fan Tray” section on page 7 to replace the fan tray.

Catalyst 6509-NEB Switch and Cisco OSR-7609 Router Upgrade Note

6 78-16162-02